XFree86.0.log XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Tue Oct 29 11:41:54 2002 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Sampo AlphaScan 411" (**) | |-->Device "S3 Trio64 (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "it" (**) XKB: layout: "it" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00 (II) PCI: 00:12:0: chip 5333,8811 card 0000,0000 rev 53 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(0:18:0) S3 Trio32/64 rev 83, Mem @ 0xe0000000/26 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [1] -1 0x00006400 - 0x0000641f (0x20) IX[B] [2] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [1] -1 0x00006400 - 0x0000641f (0x20) IX[B] [2] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [6] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0x00000000 - 0x000000ff (0x100) IX[B] [8] -1 0x00006400 - 0x0000641f (0x20) IX[B] [9] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.0.1 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "s3" (II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o (II) Module s3: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.3.5 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) v4l driver for Video4Linux (II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968, Trio32/64, Aurora64V+ (II) Primary Device is: PCI 00:12:0 (--) Assigning device section with no busID to primary device (--) Chipset Trio32/64 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [6] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0x00000000 - 0x000000ff (0x100) IX[B] [8] -1 0x00006400 - 0x0000641f (0x20) IX[B] [9] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [6] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [7] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [8] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0x00006400 - 0x0000641f (0x20) IX[B] [12] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] [13] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [14] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (**) s3(0): Depth 24, (--) framebuffer bpp 32 (==) s3(0): RGB weight 888 (==) s3(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) s3(0): Primary V_BIOS segment is: 0xc000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) s3(0): VESA BIOS detected (II) s3(0): VESA VBE Version 1.2 (II) s3(0): VESA VBE Total Mem: 2048 kB (II) s3(0): VESA VBE OEM: S3 Incorporated. Trio64V+ (==) s3(0): Using gamma correction (1.0, 1.0, 1.0) (**) s3(0): Chipset: "Trio32/64" (--) s3(0): Framebuffer @ 0xe0000000 (--) s3(0): videoRam = 2048 Kb (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (--) s3(0): MCLK 59.957 Mhz (--) s3(0): RefClock: 16000 (--) s3(0): Max pixel clock at this depth is 50 Mhz (II) s3(0): Sampo AlphaScan 411: Using hsync range of 30.00-50.00 kHz (II) s3(0): Sampo AlphaScan 411: Using vrefresh range of 50.00-120.00 Hz (II) s3(0): Clock range: 16.00 to 50.00 MHz (II) s3(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (insufficient memory for mode) (II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (insufficient memory for mode) (II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (insufficient memory for mode) (II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (insufficient memory for mode) (II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1024x768" (insufficient memory for mode) (II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1152x864" (insufficient memory for mode) (II) s3(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1280x960" (insufficient memory for mode) (II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1280x960" (insufficient memory for mode) (II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) s3(0): Not using default mode "896x672" (insufficient memory for mode) (II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) s3(0): Not using default mode "896x672" (insufficient memory for mode) (II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) s3(0): Not using default mode "928x696" (insufficient memory for mode) (II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) s3(0): Not using default mode "928x696" (insufficient memory for mode) (II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) s3(0): Not using default mode "960x720" (insufficient memory for mode) (II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) s3(0): Not using default mode "960x720" (insufficient memory for mode) (II) s3(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1152x864" (insufficient memory for mode) (II) s3(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) s3(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) s3(0): Not using default mode "1920x1200" (insufficient memory for mode) (II) s3(0): Not using default mode "960x600" (insufficient memory for mode) (--) s3(0): Virtual size is 800x600 (pitch 800) (**) s3(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) s3(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (==) s3(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0xe0000000 - 0xe3ffffff (0x4000000) MS[B] [1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B](B) [7] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0x00006400 - 0x0000641f (0x20) IX[B] [13] -1 0x0000f000 - 0x0000f00f (0x10) IX[B] [14] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [15] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (WW) System lacks support for changing MTRRs (==) s3(0): Backing store disabled (II) s3(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 color pattern filled rectangles Solid Lines (II) s3(0): Acceleration enabled (II) s3(0): Using PIO (II) s3(0): Using SW cursor (**) Option "dpms" (**) s3(0): DPMS enabled Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a is unresolved! (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (**) Option "Protocol" "Microsoft" (**) Mouse0: Protocol: "Microsoft" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/mouse" (**) Option "BaudRate" "1200" (**) Option "StopBits" "1" (**) Option "DataBits" "7" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (**) Option "Emulate3Buttons" "off" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (**) Mouse0: BaudRate: 1200 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Option "BaudRate" "1200" XF86Config-4 # XFree86 4.2.0 configuration generated by Xconfigurator 4.10.7 Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection # Red Hat Linux 6.0 and later use the xfs font server for improved # interactive performance Section "Files" FontPath "unix/:7100" EndSection # Module loading section Section "Module" Load "dbe" # Double-buffering Load "GLcore" # OpenGL support Load "dri" # Direct rendering infrastructure Load "glx" # OpenGL X protocol interface Load "extmod" # Misc. required extensions Load "v4l" # Video4Linux # Load "record" # X event recorder # You only need the following two modules if you do not use xfs. # Load "freetype" # TrueType font handler # Load "type1" # Adobe Type 1 font handler EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "it" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "Microsoft" Option "Emulate3Buttons" "off" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "Sampo AlphaScan 411" VendorName "Unknown" ModelName "Unknown" HorizSync 30.0-50.0 VertRefresh 50.0-120.0 Option "dpms" EndSection Section "Device" Identifier "S3 Trio64 (generic)" Driver "s3" BoardName "Unknown" # Use Option "nolinear" if the server doesn't start up correctly # (this avoids the linear framebuffer probe). If that fails try # option "nomemaccess". # # Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page. EndSection Section "Device" Identifier "Linux Frame Buffer" Driver "fbdev" BoardName "Unknown" EndSection Section "Screen" Identifier "Screen0" Device "S3 Trio64 (generic)" Monitor "Sampo AlphaScan 411" DefaultDepth 24 Subsection "Display" Depth 24 Modes "800x600" EndSubSection EndSection Section "DRI" Mode 0666 EndSection _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
