intel i810 & ati Rage 2c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I had no idea I had a built-in video card (i-810) on the motherboard until 
I tried to set up XFree86-4.2. I had installed the ATI Rage 2c and was 
using it fine on Win2k.
On FreeBSD 4.6.2, I get the error message  (WW) VGA: No matching Device 
section for instance (BusID PCI:1:4:0) found

The /stan/sysinstall graphic configuration of XFree86 simply does not work 
when both cards are installed.

I tried using only the i810 built-in card but that works only with 480 
resolution  which simply is not adequate for squat.
The agp.ko is correctly loaded and there is the correct agpgart in /dev. 
However, I can find nothing on or about agpgart.o that seems to be required 
to be able to use all the screen options.
I have also found that my present setup (with the two cards) is apparently 
"dual head" which is also not supported (?). I don't even want it... :))

Does anyone understand what has to be done to make XFree86 work, 
preferrably with the ATI card? But even the i810 will do?
thanks for any help.
Philip Jourdan


_______________________________________________

Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie

[Index of Archives]     [XFree86]     [Xfree86 Xpert]     [X.org]     [IETF Annouce]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]

  Powered by Linux