I upgraded by laptop (IBM Thinkpad model 560E) to redhat 7.3 the other day, and everything went fine except for I can't get X to start. When I do startx, it comes up with one of several odd displays (either vertical lines, random horizontal lines (like loss of sync), or the right 95% of the screen being solid white. It looks like it has a Trident Cyber 9382 video chip. I tried Alan's new driver from http://www.xfree86.org/~alanh and that didn't seem to help. I'm still running the XFree86 supplied by Redhat. I haven't tried switching to the XFree86 version yet. If you think this will help, let me know. I also tried putting an external monitor on the laptop and that didn't seem to help. (Either small thin squashed display, or the monitor seemed to give up and go blank) However, I'm not total sure that I got the config right for the monitor either. I'm assuming this is something stupid that I missed since it seems from reading the list that other people have gotten this to work, but if anyone has any ideas on how to troubleshoot this, it would be appreciated. Enclosed is the XFree86.0.log and XF86Config-4 files in case they are useful. (I stupidly didn't bother to back up the machine just before I upgraded it, but I may have a tape around here somewhere with the old working config on it if needed. However, it may have been using the old version of XFree86) (I also scanned the archives and the web, but most problems were either fixed with Alan's new driver, or were using XFree86 3.3.6) Thank you for any help you can give me. --- XFree86 Version 4.2.0 (Red Hat Linux release: 4.2.0-8) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 23 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.17-0.13smp i686 [ELF] Build Host: daffy.perf.redhat.com Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Sep 8 19:00:26 2002 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "CustomConfiguration" (**) | |-->Device "Trident TGUI9660 (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "unix/:7100" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1235 card 0000,0000 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1234 card 0000,0000 rev 03 class 06,80,00 hdr 00 (II) PCI: 00:03:0: chip 1023,9660 card 0000,0000 rev d3 class 03,00,00 hdr 00 (II) PCI: 00:13:0: chip 1013,1100 card 0000,0000 rev e2 class 06,05,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(0:3:0) Trident TGUI 96xx rev 211, Mem @ 0x08000000/22, 0x08400000/16, 0x08800000/22, BIOS @ 0x000c0000/16 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [1] -1 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [2] -1 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [3] -1 0x08000000 - 0x083fffff (0x400000) MX[B](B) [4] -1 0x000003e0 - 0x000003e3 (0x4) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [1] -1 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [2] -1 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [3] -1 0x08000000 - 0x083fffff (0x400000) MX[B](B) [4] -1 0x000003e0 - 0x000003e3 (0x4) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [7] -1 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [8] -1 0x08000000 - 0x083fffff (0x400000) MX[B](B) [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0x000003e0 - 0x000003e3 (0x4) IX[B] (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "v4l" (II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o (II) Module v4l: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.0.1 ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "trident" (II) Loading /usr/X11R6/lib/modules/drivers/trident_drv.o (II) Module trident: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.27 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) v4l driver for Video4Linux (II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c, tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682, providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1, cyberbladeAi1d, bladeXP, cyberbladeXPAi1 (II) Primary Device is: PCI 00:03:0 (--) Assigning device section with no busID to primary device (--) Chipset tgui9660 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [7] -1 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [8] -1 0x08000000 - 0x083fffff (0x400000) MX[B](B) [9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [10] -1 0x00000000 - 0x000000ff (0x100) IX[B] [11] -1 0x000003e0 - 0x000003e3 (0x4) IX[B] (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000cffff (0x10000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [6] -1 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [7] -1 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [8] -1 0x08000000 - 0x083fffff (0x400000) MX[B](B) [9] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0x000003e0 - 0x000003e3 (0x4) IX[B] [15] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [16] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) TRIDENT(0): Depth 16, (--) framebuffer bpp 16 (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 PIOBASE = 0x0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (==) TRIDENT(0): RGB weight 565 (==) TRIDENT(0): Default visual is TrueColor (==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0) (==) TRIDENT(0): Linear framebuffer at 0x8000000 (--) TRIDENT(0): IO registers at 0x8400000 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) TRIDENT(0): initializing int10 (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000 (II) TRIDENT(0): VESA BIOS detected (II) TRIDENT(0): VESA VBE Version 1.2 (II) TRIDENT(0): VESA VBE Total Mem: 2048 kB (II) TRIDENT(0): VESA VBE OEM: Copyright 1994 TRIDENT MICROSYSTEMS INC. (WW) System lacks support for changing MTRRs (--) TRIDENT(0): Revision is 66 (--) TRIDENT(0): Found Cyber 9382 chip (--) TRIDENT(0): RAM type is EDO Ram (--) TRIDENT(0): Using HW cursor (--) TRIDENT(0): VideoRAM: 2048 kByte (--) TRIDENT(0): TFT Panel 800x600 found (--) TRIDENT(0): Memory Clock is 780.34 MHz (==) TRIDENT(0): Min pixel clock is 12 MHz (--) TRIDENT(0): Max pixel clock is 135 MHz (II) TRIDENT(0): CustomConfiguration: Using hsync range of 24.21-50.00 kHz (II) TRIDENT(0): CustomConfiguration: Using vrefresh range of 37.83-76.00 Hz (II) TRIDENT(0): Clock range: 12.00 to 135.00 MHz (II) TRIDENT(0): Not using default mode "640x350" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x400" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "720x400" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range) (II) TRIDENT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "800x600" (hsync out of range) (II) TRIDENT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1024x768" (unknown reason) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1024x768" (unknown reason) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1024x768" (unknown reason) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1024x768" (unknown reason) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1024x768) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1024x768" (unknown reason) (II) TRIDENT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1152x864" (unknown reason) (II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x960" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x960" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1280x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (832x624) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "832x624" (unknown reason) (II) TRIDENT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (800x600) (II) TRIDENT(0): Not using default mode "1152x864" (unknown reason) (II) TRIDENT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1400x1050" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1600x1024" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) TRIDENT(0): Not using default mode "1920x1200" (insufficient memory for mode) (II) TRIDENT(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan) (--) TRIDENT(0): Virtual size is 800x600 (pitch 1024) (**) TRIDENT(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) TRIDENT(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (==) TRIDENT(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0x08800000 - 0x08bfffff (0x400000) MX[B] [1] 0 0x08400000 - 0x0840ffff (0x10000) MX[B] [2] 0 0x08000000 - 0x083fffff (0x400000) MX[B] [3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [4] -1 0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B) [5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [6] -1 0x000c0000 - 0x000cffff (0x10000) MX[B] [7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [8] -1 0x000c0000 - 0x000cffff (0x10000) MX[B](B) [9] -1 0x08800000 - 0x08bfffff (0x400000) MX[B](B) [10] -1 0x08400000 - 0x0840ffff (0x10000) MX[B](B) [11] -1 0x08000000 - 0x083fffff (0x400000) MX[B](B) [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0x000003e0 - 0x000003e3 (0x4) IX[B] [18] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [19] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) TRIDENT(0): Initializing int10 (II) TRIDENT(0): Primary V_BIOS segment is: 0xc000 (II) TRIDENT(0): Overriding Horizontal timings. (II) TRIDENT(0): Shadow off (II) TRIDENT(0): H-timing shadow registers: 0x7f 0x00 0x69 0x7f (II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x00 0x69 0x7f (II) TRIDENT(0): V-timing shadow registers: 0x72 0xf0 0x59 0x0d 0x00 (0x08) (II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x0d 0x57 0x00 0x00 (II) TRIDENT(0): Setting BIOS Mode: 77 (II) TRIDENT(0): Found Clock 40.00 n=249 m=21 k=2 (II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Lines Dashed Lines Offscreen Pixmaps Setting up tile and stipple cache: 28 128x128 slots 32 8x8 color expansion slots (==) TRIDENT(0): Backing store disabled (==) TRIDENT(0): Silken mouse enabled (**) Option "dpms" (**) TRIDENT(0): DPMS enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (**) Option "Protocol" "PS/2" (**) Mouse0: Protocol: "PS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/mouse" (**) Option "Emulate3Buttons" "on" (**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 5 (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) ----- # XFree86 4.0 configuration generated by Xconfigurator Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection # By default, Red Hat Linux 6.0 and later use xfs Section "Files" FontPath "unix/:7100" EndSection # Module loading section Section "Module" Load "dbe" # Double-buffering Load "GLcore" # OpenGL support Load "dri" # Direct rendering infrastructure Load "glx" # OpenGL X protocol interface Load "extmod" # Misc. required extensions Load "v4l" # Video4Linux # Load "record" # X event recorder # You only need the following two modules if you do not use xfs. # Load "freetype" # TrueType font handler # Load "type1" # Adobe Type 1 font handler EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Device" "/dev/mouse" Option "Protocol" "PS/2" Option "Emulate3Buttons" "on" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "CustomConfiguration" VendorName "Unknown" ModelName "Unknown" HorizSync 24.21-50 VertRefresh 37.83-76 Option "dpms" EndSection Section "Device" Identifier "Trident TGUI9660 (generic)" Driver "trident" BoardName "Unknown" EndSection Section "Device" Identifier "Linux Frame Buffer" Driver "fbdev" BoardName "Unknown" EndSection Section "Screen" Identifier "Screen0" Device "Trident TGUI9660 (generic)" Monitor "CustomConfiguration" DefaultDepth 16 Subsection "Display" Depth 24 Modes "800x600" EndSubSection Subsection "Display" Depth 16 Modes "800x600" EndSubSection Subsection "Display" Depth 8 Modes "800x600" EndSubSection EndSection Section "DRI" Mode 0666 EndSection _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
