ok I have an nvidea chip integrated onmy motherboard MSI KN7420 Pro. I just could not get X windows working on FreeBSD 4.5. In the end I gave up for the time being and have put in an old Matrox millenium card. MSI's distributors in S Ca.. have not been much help - and do not seem to care very much either. So we will steer clear of MSI motherboards in the future. David ----- Original Message ----- From: "William Hanlon" <whanlon@hrlx01.cosmic.utah.edu> To: <newbie@xfree86.org> Cc: <whanlon@cosmic.utah.edu> Sent: Friday, July 05, 2002 11:35 AM Subject: can't get 1280x1024 resolution to work > Hi, > > I have a KDS-190p monitor and NVIDIA TnT2 M64 32MB AGP video card and > I am running XFree86 4.2.0 on RedHat Linux 7.3. > > When I tried installing linux the only screen resolutions that were > clear were those for 1024x768 and below, but the monitor supports up > to 1600x1200. > > I eventually tried editing the XF86Config-4 file and added two modes > for 1280x1024: > > # 1280x1024 @ 85 Hz, 91.15 kHz hsync > Modeline "1280x1024" 157.5 1280 1344 1504 1728 > 1024 1025 1028 1072 +HSync +VSync > # 1280x1024 @ 74 Hz, 78.85 kHz hsync > Modeline "1280x1024" 135 1280 1312 1456 1712 > 1024 1027 1030 1064 +HSync +VSync > > Both of these modes are listed in the manual as factory preset modes > and so I thought would be safe to try. The first mode caused a fuzzy > display, but the second seems to work better. > > I would like to try another set of timings for the 1280x1024 mode but > there aren't any more listed in my manual and I am afraid I will > damage the monitor. > > Has anoyone has this problem with the KDS VS0-190p monitor or does > anyone have any suggestions on safe values I can use to adjust the > timing of the monitor to get a clear display? > > Thanks, > Bill > > _______________________________________________ > > Newbie@XFree86.Org > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie > _______________________________________________ Newbie@XFree86.Org *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
