Hi,
I have a KDS-190p monitor and NVIDIA TnT2 M64 32MB AGP video card and
I am running XFree86 4.2.0 on RedHat Linux 7.3.
When I tried installing linux the only screen resolutions that were
clear were those for 1024x768 and below, but the monitor supports up
to 1600x1200.
I eventually tried editing the XF86Config-4 file and added two modes
for 1280x1024:
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728
1024 1025 1028 1072 +HSync +VSync
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712
1024 1027 1030 1064 +HSync +VSync
Both of these modes are listed in the manual as factory preset modes
and so I thought would be safe to try. The first mode caused a fuzzy
display, but the second seems to work better.
I would like to try another set of timings for the 1280x1024 mode but
there aren't any more listed in my manual and I am afraid I will
damage the monitor.
Has anoyone has this problem with the KDS VS0-190p monitor or does
anyone have any suggestions on safe values I can use to adjust the
timing of the monitor to get a clear display?
Thanks,
Bill
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
