AFAIK the Radeon Card is not supported prior to XFree 4.1. Not sure, though. No clue about the radeon-mobility, but very unlikely to be supported by XFree3, too. You should have look at: http://www.xfree86.org/current/Status.html Am Donnerstag, 2. Mai 2002 12:25 schrieb Marco Valente: > I have a quite old Suse 6.4 distribution (kernel 2.2.14, XFree86 Version > 3.3.6) that I am now trying to install on a new laptop. Unfortunately, I > encountered serious problems in configuring the X server, which I already > did smoothlessly on different machines. From a quick tour in some mailing > lists I understand that I am not alone with this problem, but the possible > solutions I have found (e.g. Gato drivers) necessitate a newer version of > the kernel and Xfree, which are difficult to obtain with a home connections > and I would not need otherwise. Is there a possibility to have a basic X > system running? > > The computer is a ASUS LK8470, includes a ATI ATI M6-P AGP 4X 3D VGA chip > with 16MB Video SGRAM > (read as Mobility Radeon LY under Windows), and a TFT 14.1 monitor, capable > of a definition of 1024x768. > > I include in the following the XF86Config file and immediately after the > output of the "startx" command. > > Thanks > Marco Valente > > ************** XF86Config ********************* > # File generated by xf86config. > > # > # Copyright (c) 1995 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the > "Software"), # to deal in the Software without restriction, including > without limitation # the rights to use, copy, modify, merge, publish, > distribute, sublicense, # and/or sell copies of the Software, and to permit > persons to whom the # Software is furnished to do so, subject to the > following conditions: # > # The above copyright notice and this permission notice shall be included > in # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS > OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF > MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. > IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR > OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, > ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > OTHER DEALINGS IN THE # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/URW/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/PEX/" > # FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/" > # FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc/" > # FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi/" > # FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi/" > # FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1/" > # FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi/" > # FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi/" > # FontPath "/usr/X11R6/lib/X11/fonts/kwintv/" > # FontPath "/usr/X11R6/lib/X11/fonts/truetype/" > # FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc/" > # FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi/" > # FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/uni/" > FontPath "/usr/X11R6/lib/X11/fonts/xtest/" > > # For OSs that support Dynamically loaded modules, ModulePath can be > # used to set a search path for the modules. This is currently supported > # for Linux ELF, FreeBSD 2.x and NetBSD 1.x. The default path is shown > # here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Module section -- this is an optional section which is used to specify > # which dynamically loadable modules to load. Dynamically loadable > # modules are currently supported only for Linux ELF, FreeBSD 2.x > # and NetBSD 1.x. Currently, dynamically loadable modules are used > # only for some extended input (XInput) device drivers. > # ********************************************************************** > # > # Section "Module" > # > # This loads the module for the Joystick driver > # > # Load "xf86Jstk.so" > # > # EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # NoTrapSignals > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # DontZap > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # DontZoom > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # DisableVidModeExtension > > # Uncomment this to enable the use of a non-local xvidtune client. > > # AllowNonLocalXvidtune > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # DisableModInDev > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # AllowNonLocalModInDev > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Keyboard section > # ********************************************************************** > > Section "Keyboard" > > Protocol "Standard" > > # when using XQUEUE, comment out the above line, and uncomment the > # following line > > # Protocol "Xqueue" > > AutoRepeat 500 30 > # Let the server do the NumLock processing. This should only be required > # when using pre-R6 clients > # ServerNumLock > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Xleds 1 2 3 > > # To set the LeftAlt to Meta, RightAlt key to ModeShift, > # RightCtl key to Compose, and ScrollLock key to ModeLock: > > # LeftAlt Meta > # RightAlt ModeShift > # RightCtl Compose > # ScrollLock ModeLock > > # To disable the XKEYBOARD extension, uncomment XkbDisable. > > XkbDisable > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # XkbModel "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # XkbModel "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # XkbLayout "de" > # or: > # XkbLayout "de" > # XkbVariant "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # XkbOptions "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > # XkbRules "xfree86" > # XkbModel "pc101" > # XkbLayout "us" > # XkbVariant "" > # XkbOptions "" > > XkbKeymap "xfree86(us)" > > > EndSection > > > # ********************************************************************** > # Pointer section > # ********************************************************************** > > Section "Pointer" > Protocol "PS/2" > Device "/dev/mouse" > > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > > # Protocol "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice > # or for the AceCad tablets which require 9600 baud > > # BaudRate 9600 > # SampleRate 150 > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > # Emulate3Buttons > # Emulate3Timeout 50 > > # ChordMiddle is an option for some 3-button Logitech mice > > # ChordMiddle > > EndSection > > > # ********************************************************************** > # Xinput section -- this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the XF86Config man page for a description of the options. > # ********************************************************************** > # > # Section "Xinput" > # SubSection "WacomStylus" > # Port "/dev/ttyS1" > # DeviceName "Wacom" > # EndSubSection > # SubSection "WacomCursor" > # Port "/dev/ttyS1" > # EndSubSection > # SubSection "WacomEraser" > # Port "/dev/ttyS1" > # EndSubSection > # > # SubSection "Elographics" > # Port "/dev/ttyS1" > # DeviceName "Elo" > # MinimumXPosition 300 > # MaximumXPosition 3500 > # MinimumYPosition 300 > # MaximumYPosition 3500 > # Screen 0 > # UntouchDelay 10 > # ReportDelay 10 > # EndSubSection > # > # SubSection "Joystick" > # Port "/dev/joy0" > # DeviceName "Joystick" > # TimeOut 10 > # MinimumXPosition 100 > # MaximumXPosition 1300 > # MinimumYPosition 100 > # MaximumYPosition 1100 > # # CenterX 700 > # # CenterY 600 > # Delta 20 > # EndSubSection > # > # The Mouse Subsection contains the same type of entries as the > # standard Pointer Section (see above), with the addition of the > # DeviceName entry. > # > # SubSection "Mouse" > # Port "/dev/mouse2" > # DeviceName "Second Mouse" > # Protocol "Logitech" > # EndSubSection > # EndSection > > # ********************************************************************** > # Monitor section > # ********************************************************************** > > # Any number of monitor sections may be present > > Section "Monitor" > > Identifier "My Monitor" > VendorName "Unknown" > ModelName "Unknown" > > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > HorizSync 31.5 - 64.3 > > # HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies > > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > VertRefresh 60 > > # Modes can be specified in two formats. A compact one-line format, or > # a multi-line format. > > # These two are equivalent > > # ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace > > # Mode "1024x768i" > # DotClock 45 > # HTimings 1024 1048 1208 1264 > # VTimings 768 776 784 817 > # Flags "Interlace" > # EndMode > > # This is a set of standard mode timings. Modes that are out of monitor > spec # are automatically deleted by the server (provided the HorizSync and > # VertRefresh lines are correct), so there's no immediate need to > # delete mode timings (unless particular mode timings don't work on your > # monitor). With these modes, the best standard mode that your monitor > # and video card can support for a given resolution is automatically > # used. > > # 640x400 @ 70 Hz, 31.5 kHz hsync > Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 > # 640x480 @ 60 Hz, 31.5 kHz hsync > Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 > # 800x600 @ 56 Hz, 35.15 kHz hsync > ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 > # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync > Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 > Interlace > > # 640x400 @ 85 Hz, 37.86 kHz hsync > Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 > -HSync +VSync > # 640x480 @ 72 Hz, 36.5 kHz hsync > Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 > # 640x480 @ 75 Hz, 37.50 kHz hsync > ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 > -HSync -VSync > # 800x600 @ 60 Hz, 37.8 kHz hsync > Modeline "800x600" 40 800 840 968 1056 600 601 605 628 > +hsync +vsync > > # 640x480 @ 85 Hz, 43.27 kHz hsync > Modeline "640x480" 36 640 696 752 832 480 481 484 509 > -HSync -VSync > # 1152x864 @ 89 Hz interlaced, 44 kHz hsync > ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 > Interlace > > # 800x600 @ 72 Hz, 48.0 kHz hsync > Modeline "800x600" 50 800 856 976 1040 600 637 643 666 > +hsync +vsync > # 1024x768 @ 60 Hz, 48.4 kHz hsync > Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 > -hsync -vsync > > # 640x480 @ 100 Hz, 53.01 kHz hsync > Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 > -HSync -VSync > # 1152x864 @ 60 Hz, 53.5 kHz hsync > Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 > -HSync -VSync > # 800x600 @ 85 Hz, 55.84 kHz hsync > Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 > -HSync -VSync > > # 1024x768 @ 70 Hz, 56.5 kHz hsync > Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 > -hsync -vsync > # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync > Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 > Interlace > > # 800x600 @ 100 Hz, 64.02 kHz hsync > Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 > -HSync -VSync > # 1024x768 @ 76 Hz, 62.5 kHz hsync > Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 > # 1152x864 @ 70 Hz, 62.4 kHz hsync > Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 > # 1280x1024 @ 61 Hz, 64.2 kHz hsync > Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 > > # 1024x768 @ 85 Hz, 70.24 kHz hsync > Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync > -VSync > # 1152x864 @ 78 Hz, 70.8 kHz hsync > Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 > > # 1280x1024 @ 70 Hz, 74.59 kHz hsync > Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync > -VSync > # 1600x1200 @ 60Hz, 75.00 kHz hsync > Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync > +VSync > # 1152x864 @ 84 Hz, 76.0 kHz hsync > Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 > > # 1280x1024 @ 74 Hz, 78.85 kHz hsync > Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 > > # 1024x768 @ 100Hz, 80.21 kHz hsync > Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync > -VSync > # 1280x1024 @ 76 Hz, 81.13 kHz hsync > Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 > > # 1600x1200 @ 70 Hz, 87.50 kHz hsync > Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 > -HSync -VSync > # 1152x864 @ 100 Hz, 89.62 kHz hsync > Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 > -HSync -VSync > # 1280x1024 @ 85 Hz, 91.15 kHz hsync > Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 > +HSync +VSync > # 1600x1200 @ 75 Hz, 93.75 kHz hsync > Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 > +HSync +VSync > # 1600x1200 @ 85 Hz, 105.77 kHz hsync > Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 > +HSync +VSync > # 1280x1024 @ 100 Hz, 107.16 kHz hsync > Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 > -HSync -VSync > > # 1800x1440 @ 64Hz, 96.15 kHz hsync > ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync > +VSync > # 1800x1440 @ 70Hz, 104.52 kHz hsync > ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync > +VSync > > # 512x384 @ 78 Hz, 31.50 kHz hsync > Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync > -VSync > # 512x384 @ 85 Hz, 34.38 kHz hsync > Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync > -VSync > > # Low-res Doublescan modes > # If your chipset does not support doublescan, you get a 'squashed' > # resolution like 320x400. > > # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio > Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 > Doublescan > # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio > Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 > Doublescan > # 320x240 @ 72 Hz, 36.5 kHz hsync > Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 > Doublescan > # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio > ModeLine "400x300" 18 400 416 448 512 300 301 302 312 > Doublescan > # 400x300 @ 60 Hz, 37.8 kHz hsync > Modeline "400x300" 20 400 416 480 528 300 301 303 314 > Doublescan > # 400x300 @ 72 Hz, 48.0 kHz hsync > Modeline "400x300" 25 400 424 488 520 300 319 322 333 > Doublescan > # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio > ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 > Doublescan > # 480x300 @ 60 Hz, 37.8 kHz hsync > Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 > Doublescan > # 480x300 @ 63 Hz, 39.6 kHz hsync > Modeline "480x300" 25 480 496 576 632 300 301 303 314 > Doublescan > # 480x300 @ 72 Hz, 48.0 kHz hsync > Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 > Doublescan > > EndSection > > > # ********************************************************************** > # Graphics device section > # ********************************************************************** > > # Any number of graphics device sections may be present > > # Standard VGA Device: > > Section "Device" > Identifier "Generic VGA" > VendorName "Unknown" > BoardName "Unknown" > Chipset "generic" > > # VideoRam 256 > > # Clocks 25.2 28.3 > > EndSection > > # Sample Device for accelerated server: > > # Section "Device" > # Identifier "Actix GE32+ 2MB" > # VendorName "Actix" > # BoardName "GE32+" > # Ramdac "ATT20C490" > # Dacspeed 110 > # Option "dac_8_bit" > # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 > # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 > # EndSection > > # Sample Device for Hercules mono card: > > # Section "Device" > # Identifier "Hercules mono" > # EndSection > > # Device configured by xf86config: > > Section "Device" > Identifier "ATI Mach64" > VendorName "Unknown" > BoardName "Unknown" > #VideoRam 16384 > # Insert Clocks lines here if appropriate > EndSection > > > # ********************************************************************** > # Screen sections > # ********************************************************************** > > # The Colour SVGA server > > Section "Screen" > Driver "svga" > Device "Generic VGA" > #Device "ATI Mach64" > Monitor "My Monitor" > Subsection "Display" > Depth 8 > #Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > Virtual 320 200 > #Virtual 1600 1280 > EndSubsection > EndSection > > # The 16-color VGA server > > Section "Screen" > Driver "vga16" > Device "Generic VGA" > Monitor "My Monitor" > Subsection "Display" > Modes "640x480" "800x600" > ViewPort 0 0 > Virtual 800 600 > EndSubsection > EndSection > > # The Mono server > > Section "Screen" > Driver "vga2" > Device "Generic VGA" > Monitor "My Monitor" > Subsection "Display" > Modes "640x480" "800x600" > ViewPort 0 0 > Virtual 800 600 > EndSubsection > EndSection > > # The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32, > Mach64) > > Section "Screen" > Driver "accel" > Device "ATI Mach64" > Monitor "My Monitor" > Subsection "Display" > Depth 8 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "640x480" "800x600" "1024x768" "1280x1024" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 32 > Modes "640x480" "800x600" "1024x768" > ViewPort 0 0 > EndSubsection > EndSection > > ************** OUTPUT FROM "STARTX" ********************* > > > XFree86 Version 3.3.6 / X Window System > (protocol Version 11, revision 0, > vendor release 6300) > Release Date: January 8 1999 > If the server is older > than 6-12 months, or if your card is newer > than the above date, look for a > newer version before reporting > problems. (see > http://www.XFree86.Org/FAQ) > Operating System: Linux 2.2.13 i586 [ELF] > SuSE > Configured drivers: > Mach64: accelerated server for ATI Mach64 > graphics adaptors (Patchlevel 0) > (using VT number 7) > > XF86Config: > /etc/XF86Config > (**) stands for supplied, (--) stands for probed/default > values > (**) XKB: disabled > (**) XKB: keymap: "xfree86(us)" (overrides other > XKB settings) > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 > (**) > Mach64: Graphics device ID: "ATI Mach64" > (**) Mach64: Monitor ID: "My > Monitor" > (--) Mach64: Mode "640x400" needs vert refresh rate of 69.93 Hz. > Deleted. > (--) Mach64: Mode "800x600" needs vert refresh rate of 56.25 Hz. > Deleted. > (--) Mach64: Mode "1024x768" needs vert refresh rate of 86.96 Hz. > Deleted. > (--) Mach64: Mode "640x400" needs vert refresh rate of 85.08 Hz. > Deleted. > (--) Mach64: Mode "640x480" needs vert refresh rate of 69.98 Hz. > Deleted. > (--) Mach64: Mode "640x480" needs vert refresh rate of 75.00 Hz. > Deleted. > (--) Mach64: Mode "800x600" needs vert refresh rate of 60.32 Hz. > Deleted. > (--) Mach64: Mode "640x480" needs vert refresh rate of 85.01 Hz. > Deleted. > (--) Mach64: Mode "1152x864" needs vert refresh rate of 89.18 Hz. > Deleted. > (--) Mach64: Mode "800x600" needs vert refresh rate of 72.19 Hz. > Deleted. > (--) Mach64: Mode "640x480" needs vert refresh rate of 100.02 Hz. > Deleted. > (--) Mach64: Mode "800x600" needs vert refresh rate of 84.99 Hz. > Deleted. > (--) Mach64: Mode "1024x768" needs vert refresh rate of 70.07 Hz. > Deleted. > (--) Mach64: Mode "1280x1024" needs vert refresh rate of 87.59 Hz. > Deleted. > (--) Mach64: Mode "800x600" needs vert refresh rate of 100.03 Hz. > Deleted. > (--) Mach64: Mode "1024x768" needs vert refresh rate of 75.94 Hz. > Deleted. > (--) Mach64: Mode "1152x864" needs vert refresh rate of 69.74 Hz. > Deleted. > (--) Mach64: Mode "1280x1024" needs vert refresh rate of 60.96 Hz. > Deleted. > (--) Mach64: Mode "1024x768" needs hsync freq of 70.24 kHz. > Deleted. > (--) Mach64: Mode "1152x864" needs hsync freq of 70.88 kHz. > Deleted. > (--) Mach64: Mode "1280x1024" needs hsync freq of 74.59 kHz. > Deleted. > (--) Mach64: Mode "1600x1200" needs hsync freq of 75.00 kHz. > Deleted. > (--) Mach64: Mode "1152x864" needs hsync freq of 76.01 kHz. > Deleted. > (--) Mach64: Mode "1280x1024" needs hsync freq of 78.86 kHz. > Deleted. > (--) Mach64: Mode "1024x768" needs hsync freq of 80.21 kHz. > Deleted. > (--) Mach64: Mode "1280x1024" needs hsync freq of 81.13 kHz. > Deleted. > (--) Mach64: Mode "1600x1200" needs hsync freq of 87.50 kHz. > Deleted. > (--) Mach64: Mode "1152x864" needs hsync freq of 89.62 kHz. > Deleted. > (--) Mach64: Mode "1280x1024" needs hsync freq of 91.15 kHz. > Deleted. > (--) Mach64: Mode "1600x1200" needs hsync freq of 93.75 kHz. > Deleted. > (--) Mach64: Mode "1600x1200" needs hsync freq of 105.77 kHz. > Deleted. > (--) Mach64: Mode "1280x1024" needs hsync freq of 107.16 kHz. > Deleted. > (--) Mach64: Mode "1800X1440" needs hsync freq of 96.15 kHz. > Deleted. > (--) Mach64: Mode "1800X1440" needs hsync freq of 104.52 kHz. > Deleted. > (--) Mach64: Mode "512x384" needs vert refresh rate of 77.97 Hz. > Deleted. > (--) Mach64: Mode "512x384" needs vert refresh rate of 85.09 Hz. > Deleted. > (--) Mach64: Mode "320x200" needs vert refresh rate of 69.93 Hz. > Deleted. > (--) Mach64: Mode "320x240" needs vert refresh rate of 75.14 Hz. > Deleted. > (--) Mach64: Mode "400x300" needs vert refresh rate of 56.34 Hz. > Deleted. > (--) Mach64: Mode "400x300" needs vert refresh rate of 60.32 Hz. > Deleted. > (--) Mach64: Mode "400x300" needs vert refresh rate of 72.19 Hz. > Deleted. > (--) Mach64: Mode "480x300" needs vert refresh rate of 56.34 Hz. > Deleted. > (--) Mach64: Mode "480x300" needs vert refresh rate of 60.19 Hz. > Deleted. > (--) Mach64: Mode "480x300" needs vert refresh rate of 62.99 Hz. > Deleted. > (--) Mach64: Mode "480x300" needs vert refresh rate of 72.07 Hz. > Deleted. > Warning: 'fonts.dir' not found (or not valid) in > "/usr/X11R6/lib/X11/fonts/PEX/". > Entry deleted from font path. > > (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/PEX/"). > (**) FontPath > set to > "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/:unscaled,/u >s > r/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unsc >a > led,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/URW/,/usr/X11R >6 > /lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fo >n > ts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/latin2/ >7 > 5dpi/,/usr/X11R6/lib/X11/fonts/latin2/100dpi/,/usr/X11R6/lib/X11/fonts/uni/ >, /usr/X11R6/lib/X11/fonts/xtest/" > (--) Mach64: PCI: unknown ATI (0x4c59) rev > 0, Aperture @ 0xf0000000, Registers @ 0xef000000, Block I/O @ 0xd800 > > *** > None of the configured devices were detected.*** > > > Fatal server error: > no > screens found > > When reporting a problem related to a server crash, please > send > the full server output, not just the last messages > > X connection to > > :0.0 broken (explicit kill or server shutdown). > > _______________________________________________ > > Newbie@XFree86.Org > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie
