Duane Clark wrote: > shane2peru wrote: > > Duane Clark wrote: > >> shane2peru wrote: > >>> ... > >>> here is the error when trying to backup the database: > >>> > >>> ... > >>> wine: Call from 0x7b840790 to unimplemented function > >>> msvcrt.dll._mbsspnp, aborting > >> Have you tried putting a copy of a native Windows msvcrt.dll into your > >> Wine windows/system32 directory, and configuring Wine to use it? Just > >> set Wine to use it globally. Almost any msvcrt.dll probably will do. > > > > By this do you mean running winecfg and going to the Library, and > > adding that as native? > > Yes. Make sure in the "Applications" tab, you select "Default Settings" > before going to the "Libraries" tab. > > > If that is what you mean, the answer is yes. I > > have done that there were about 4 different ones that were very > > similar. I also have my windows partition, I can copy of dll's from > > there, however I need to know which ones. > > Yes, you should copy the one from your Windows partition. Just copy > plain old msvcrt.dll. > > As far as I can tell, the error message above indicates that whatever > version of msvcrt.dll you were using did not have the function _mbsspnp, > which the program was apparently expecting. Looking at MSDN, it appears > this function is rather old (it mentions Win95 compatibility), so I > would have expected it to be in almost any real Windows msvcrt.dll (but > it is not in Wine's msvcrt). If you are still getting that particular > error message, you might want to check again how you have things > configured with winecfg. > > You could always set the environment variable WINEDEBUG=+loaddll, and > then run ACT. It should show which DLLs it is actually loading. I copied the windows msvcrt.dll over, there are actually 3 the other two are msvcrt20.dll msvcrt40.dll I did them one at a time, and changed owner, then permissions to make them the same as the rest of the dll's in the system32 directory. Ok, here is what I get: libGL warning: 3D driver claims to not support visual 0x4b libGL warning: 3D driver claims to not support visual 0x4b fixme:system:SystemParametersInfoW Unimplemented action: 8193 (SPI_SETFOREGROUNDLOCKTIMEOUT) fixme:atl:AtlModuleInit SEMI-STUB (0x15c7328 0x15c7020 0x15c0000) fixme:ole:CoRegisterMessageFilter message filter has been registered, but will not be used fixme:ole:CoRegisterMessageFilter message filter has been registered, but will not be used err:dc:CreateDCW no driver found for L"" fixme:commdlg:GetFileName95 Flags 0x00800000 not yet implemented err:x11drv:X11DRV_CreateWindow invalid window width -15 err:x11drv:X11DRV_CreateWindow invalid window height -20 err:x11drv:X11DRV_CreateWindow invalid window width -15 err:x11drv:X11DRV_CreateWindow invalid window height -20 err:x11drv:X11DRV_CreateWindow invalid window width -15 err:x11drv:X11DRV_CreateWindow invalid window height -20 fixme:shdocvw:PersistStreamInit_InitNew (0x1d60f28) fixme:shdocvw:WebBrowser_put_RegisterAsDropTarget (0x1d60f28)->(0) err:x11drv:X11DRV_CreateWindow invalid window width -15 err:x11drv:X11DRV_CreateWindow invalid window height -20 err:x11drv:X11DRV_CreateWindow invalid window width -15 err:x11drv:X11DRV_CreateWindow invalid window height -20 err:x11drv:X11DRV_CreateWindow invalid window width -15 err:x11drv:X11DRV_CreateWindow invalid window height -20 wine: Call from 0x7b840790 to unimplemented function msvcrt.dll._mbsspnp, aborting > You could always set the environment variable WINEDEBUG=+loaddll, and > then run ACT. It should show which DLLs it is actually loading. Can you explain how to do this? Thanks. I tried setting the configuration in wine to emulate 2000, I had been using xp, and I also used the default. I really don't see much of a difference between the two. When I go to the libraries, and add the msvcrt to native bulletin, ACT won't even start. ?? I tried it as just native and it wouldn't start either. ? Thanks for the help. Shane _______________________________________________ wine-users mailing list wine-users@xxxxxxxxxx http://www.winehq.org/mailman/listinfo/wine-users
