Hello all, Flame me if you must but I have a problem, I'm either too thick to work it out or the docs miss something vital to my machine. I have read through the docs and here is my problem.. I have installed wine from Mandrake 7.2 distribution - wine 20000909mdk1, but alas, it won't go. I have built a config file based on how to docs - refer below: [Drive C] "Path" = "/windows" "Type" = "hd" "Label" = "Hard Drive" "Filesystem" = "win95" # This is a setup for Drive X, a generic CD-ROM drive: [Drive D] "Path" = "/dos-d" "Type" = "cdrom" "Label" = "Total Annihilation" "Filesystem" = "win95" "Device" = "/dev/hdc" # And here is a setup for Drive X, a generic floppy drive: [Drive A] "Type" = "floppy" "Path" = "/mnt/floppy" "Label" = "Floppy Drive" "Serial" = "87654321" "Filesystem" = "win95" "Device" = "/dev/fd0" "Windows" = "c:\\windows" "System" = "c:\\windows\\system" "Temp" = "c:\\temp" "Path" = "c:\\windows;c:\\windows\\system;c:\\blanco" "GraphicsDriver" = "x11drv" "Printer" = "on" "ShellLinker" = "wineshelllink" "ShowDirSymlinks" = "1" "SymbolTableFile" = "wine.sym" [DllOverrides] "commdlg" = "builtin, native" "comdlg32" = "builtin, native" "ver" = "builtin, native" "version" = "builtin, native" "shell" = "builtin, native" "shell32" = "builtin, native" "lzexpand" = "builtin, native" "lz32" = "builtin, native" "comctl32" = "builtin, native" "commctrl" = "builtin, native" "wsock32" = "builtin" "winsock" = "builtin" "advapi32" = "builtin, native" "crtdll" = "builtin, native" "mpr" = "builtin, native" "winspool.drv" = "builtin, native" "ddraw" = "builtin, native" "dinput" = "builtin, native" "dsound" = "builtin, native" "mmsystem" = "builtin" "winmm" = "builtin" "msvcrt" = "native, builtin" "msvideo" = "builtin, native" "msvfw32" = "builtin, native" "mcicda.drv" = "builtin, native" "mciseq.drv" = "builtin, native" "mciwave.drv" = "builtin, native" "mciavi.drv" = "native, builtin" "mcianim.drv" = "native, builtin" "msacm.drv" = "builtin, native" "msacm" = "builtin, native" "msacm32" = "builtin, native" "midimap.drv" = "builtin, native" "wnaspi32" = "builtin" "icmp" = "builtin" [fonts] "Resolution" = "96" "Default" = "-adobe-times-" [serialports] "Com1" = "/dev/cua0" "Com2" = "/dev/cua1" "Com3" = "/dev/cua2" "Com4" = "/dev/cua3" [parallelports] "Lpt1" = "/dev/lp0" "LPT1:" = "|lpr" [WinMM] "Drivers" = "wineoss.drv" "WaveMapper" = "msacm.drv" "MidiMapper" = "midimap.drv" [Tweak.Fonts] "System.Height" = "<point size>" # Sets the height of the system typeface "System.Bold" = "[false]" # Whether the system font should be boldfaced "System.Italic" = "[false]" # Whether the system font should be italicized "System.Underline" = "[false]" # Whether the system font should be underlined "System.StrikeOut" = "[false]" # Whether the system font should be struck out "OEMFixed.xxx" # Same parameters for the OEM fixed typeface "AnsiFixed.xxx" # Same parameters for the Ansi fixed typeface "AnsiVar.xxx" # Same parameters for the Ansi variable typeface "SystemFixed.xxx" # Same parameters for the System fixed typeface [Tweak.Layout] "WineLook" = "Win98" # Changes Wine's look and feel The results of trying to run wine is usually that wine was not able to find drive x, perhaps you have not configured your wine.conf file properly or ... etc. Can someone please advise where I am going wrong with this thing?? Thanking you in advance.. Nicholas Tomlin. ************************************************************************************************** Boundless power to create. Anytime. Anywhere. Share Corel's vision.! Visit http://www.corel.com/draw10. ************************************************************************************************** _______________________________________________ wine-users mailing list wine-users@winehq.com http://www.winehq.com/mailman/listinfo/wine-users
