ShellExecute fixes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ShellExecute was broken when the file type (which the operation was
requested on)
had a ddeexec entry in the registry
this patch takes care of this case
wine is now able (when Windows Media Player and Internet Explorer are
installed)
to launch most of the Internet actions from WMP (like the radio list,
music list...)

beware too, that some pathnames in the registry (when copied from a
Windows installation)
are stored in short names, which will cause lots of issues when used
directly
setting them by hand to long names solves the issue

(BTW, is should incorporate, in a different form, Andi's ShellExecute
patch. So, 
Andi's patch shouldn't be needed)

A+
Name: shlexec
ChangeLog: fixed ShellExecute functions when ddeexec was present in registry
GenDate: 2002/02/23 21:54:59 UTC
ModifiedFiles: dlls/shell32/shell32_main.c dlls/shell32/shell32_main.h dlls/shell32/shell.c dlls/shell32/Makefile.in
AddedFiles: dlls/shell32/shlexec.c
===================================================================
RCS file: /home/cvs/cvsroot/wine/wine/dlls/shell32/shell32_main.c,v
retrieving revision 1.91
diff -u -u -r1.91 shell32_main.c
--- dlls/shell32/shell32_main.c	2 Feb 2002 18:42:15 -0000	1.91
+++ dlls/shell32/shell32_main.c	23 Feb 2002 17:32:22 -0000
@@ -545,50 +545,6 @@
 	return ret;
 }
 
-/*************************************************************************
- * FindExecutableA			[SHELL32.@]
- */
-HINSTANCE WINAPI FindExecutableA( LPCSTR lpFile, LPCSTR lpDirectory,
-                                      LPSTR lpResult )
-{ 
-  HINSTANCE retval=31;    /* default - 'No association was found' */
-    char old_dir[1024];
-
-  TRACE("File %s, Dir %s\n", 
-		 (lpFile != NULL?lpFile:"-"), 
-		 (lpDirectory != NULL?lpDirectory:"-"));
-
-    lpResult[0]='\0'; /* Start off with an empty return string */
-
-    /* trap NULL parameters on entry */
-    if (( lpFile == NULL ) || ( lpResult == NULL ))
-  { /* FIXME - should throw a warning, perhaps! */
-	return 2; /* File not found. Close enough, I guess. */
-    }
-
-    if (lpDirectory)
-  { GetCurrentDirectoryA( sizeof(old_dir), old_dir );
-        SetCurrentDirectoryA( lpDirectory );
-    }
-
-    retval = SHELL_FindExecutable( lpFile, "open", lpResult );
-
-  TRACE("returning %s\n", lpResult);
-  if (lpDirectory)
-    SetCurrentDirectoryA( old_dir );
-    return retval;
-}
-
-/*************************************************************************
- * FindExecutableW			[SHELL32.@]
- */
-HINSTANCE WINAPI FindExecutableW(LPCWSTR lpFile, LPCWSTR lpDirectory,
-                                     LPWSTR lpResult)
-{
-  FIXME("(%p,%p,%p): stub\n", lpFile, lpDirectory, lpResult);
-  return 31;    /* default - 'No association was found' */
-}
-
 typedef struct
 { LPCSTR  szApp;
     LPCSTR  szOtherStuff;
@@ -694,36 +650,6 @@
           return NOERROR;
 	}
 	return DISP_E_MEMBERNOTFOUND;
-}
-
-/*************************************************************************
- * ShellExecuteA			[SHELL32.290]
- */
-HINSTANCE WINAPI ShellExecuteA( HWND hWnd, LPCSTR lpOperation,
-                                    LPCSTR lpFile, LPCSTR lpParameters,
-                                    LPCSTR lpDirectory, INT iShowCmd )
-{   TRACE("\n");
-    return ShellExecute16( hWnd, lpOperation, lpFile, lpParameters,
-                           lpDirectory, iShowCmd );
-}
-
-/*************************************************************************
- * ShellExecuteW			[SHELL32.294]
- * from shellapi.h
- * WINSHELLAPI HINSTANCE APIENTRY ShellExecuteW(HWND hwnd, LPCWSTR lpOperation, 
- * LPCWSTR lpFile, LPCWSTR lpParameters, LPCWSTR lpDirectory, INT nShowCmd);   
- */
-HINSTANCE WINAPI 
-ShellExecuteW(
-       HWND hwnd, 
-       LPCWSTR lpOperation, 
-       LPCWSTR lpFile, 
-       LPCWSTR lpParameters, 
-       LPCWSTR lpDirectory, 
-       INT nShowCmd) {
-
-       FIXME(": stub\n");
-       return 0;
 }
 
 /*************************************************************************
Index: dlls/shell32/shell32_main.h
===================================================================
RCS file: /home/cvs/cvsroot/wine/wine/dlls/shell32/shell32_main.h,v
retrieving revision 1.44
diff -u -u -r1.44 shell32_main.h
--- dlls/shell32/shell32_main.h	2 Feb 2002 18:42:15 -0000	1.44
+++ dlls/shell32/shell32_main.h	23 Feb 2002 17:38:51 -0000
@@ -163,8 +163,6 @@
 BOOL SHELL_DeleteFileA(LPCSTR pszFile, BOOL bShowUI);
 BOOL SHELL_WarnItemDelete(int nKindOfDialog, LPCSTR szDir);
 
-extern HINSTANCE SHELL_FindExecutable(LPCSTR,LPCSTR ,LPSTR);
-
 /* 16-bit functions */
 void        WINAPI DragAcceptFiles16(HWND16 hWnd, BOOL16 b);
 UINT16      WINAPI DragQueryFile16(HDROP16 hDrop, WORD wFile, LPSTR lpszFile, WORD wLength);
Index: dlls/shell32/shell.c
===================================================================
RCS file: /home/cvs/cvsroot/wine/wine/dlls/shell32/shell.c,v
retrieving revision 1.36
diff -u -u -r1.36 shell.c
--- dlls/shell32/shell.c	14 Feb 2002 19:20:30 -0000	1.36
+++ dlls/shell32/shell.c	23 Feb 2002 17:38:04 -0000
@@ -2,6 +2,7 @@
  * 				Shell Library Functions
  *
  *  1998 Marcus Meissner
+ *  2002 Eric Pouech
  */
 
 #include "config.h"
@@ -18,6 +19,7 @@
 #include "shellapi.h"
 #include "shlobj.h"
 #include "shlwapi.h"
+#include "ddeml.h"
 
 #include "wine/winbase16.h"
 #include "wine/winuser16.h"
@@ -163,302 +165,6 @@
   
   GlobalUnlock16(hDrop);
   return bRet;
-}
-
-/*************************************************************************
- *	SHELL_FindExecutable [Internal]
- *
- * Utility for code sharing between FindExecutable and ShellExecute
- */
-HINSTANCE SHELL_FindExecutable( LPCSTR lpFile, 
-                                         LPCSTR lpOperation,
-                                         LPSTR lpResult)
-{ char *extension = NULL; /* pointer to file extension */
-    char tmpext[5];         /* local copy to mung as we please */
-    char filetype[256];     /* registry name for this filetype */
-    LONG filetypelen=256;   /* length of above */
-    char command[256];      /* command from registry */
-    LONG commandlen=256;    /* This is the most DOS can handle :) */
-    char buffer[256];       /* Used to GetProfileString */
-    HINSTANCE retval=31;  /* default - 'No association was found' */
-    char *tok;              /* token pointer */
-    int i;                  /* random counter */
-    char xlpFile[256] = ""; /* result of SearchPath */
-
-  TRACE("%s\n", (lpFile != NULL?lpFile:"-") );
-
-    lpResult[0]='\0'; /* Start off with an empty return string */
-
-    /* trap NULL parameters on entry */
-    if (( lpFile == NULL ) || ( lpResult == NULL ) || ( lpOperation == NULL ))
-  { WARN_(exec)("(lpFile=%s,lpResult=%s,lpOperation=%s): NULL parameter\n",
-           lpFile, lpOperation, lpResult);
-        return 2; /* File not found. Close enough, I guess. */
-    }
-
-    if (SearchPathA( NULL, lpFile,".exe",sizeof(xlpFile),xlpFile,NULL))
-  { TRACE("SearchPathA returned non-zero\n");
-        lpFile = xlpFile;
-    }
-
-    /* First thing we need is the file's extension */
-    extension = strrchr( xlpFile, '.' ); /* Assume last "." is the one; */
-					/* File->Run in progman uses */
-					/* .\FILE.EXE :( */
-  TRACE("xlpFile=%s,extension=%s\n", xlpFile, extension);
-
-    if ((extension == NULL) || (extension == &xlpFile[strlen(xlpFile)]))
-  { WARN("Returning 31 - No association\n");
-        return 31; /* no association */
-    }
-
-    /* Make local copy & lowercase it for reg & 'programs=' lookup */
-    lstrcpynA( tmpext, extension, 5 );
-    CharLowerA( tmpext );
-  TRACE("%s file\n", tmpext);
-    
-    /* Three places to check: */
-    /* 1. win.ini, [windows], programs (NB no leading '.') */
-    /* 2. Registry, HKEY_CLASS_ROOT\<filetype>\shell\open\command */
-    /* 3. win.ini, [extensions], extension (NB no leading '.' */
-    /* All I know of the order is that registry is checked before */
-    /* extensions; however, it'd make sense to check the programs */
-    /* section first, so that's what happens here. */
-
-    /* See if it's a program - if GetProfileString fails, we skip this
-     * section. Actually, if GetProfileString fails, we've probably
-     * got a lot more to worry about than running a program... */
-    if ( GetProfileStringA("windows", "programs", "exe pif bat com",
-						  buffer, sizeof(buffer)) > 0 )
-  { for (i=0;i<strlen(buffer); i++) buffer[i]=tolower(buffer[i]);
-
-		tok = strtok(buffer, " \t"); /* ? */
-		while( tok!= NULL)
-		  {
-			if (strcmp(tok, &tmpext[1])==0) /* have to skip the leading "." */
-			  {
-				strcpy(lpResult, xlpFile);
-				/* Need to perhaps check that the file has a path
-				 * attached */
-        TRACE("found %s\n", lpResult);
-        return 33;
-
-		/* Greater than 32 to indicate success FIXME According to the
-		 * docs, I should be returning a handle for the
-		 * executable. Does this mean I'm supposed to open the
-		 * executable file or something? More RTFM, I guess... */
-			  }
-			tok=strtok(NULL, " \t");
-		  }
-	  }
-
-    /* Check registry */
-    if (RegQueryValue16( HKEY_CLASSES_ROOT, tmpext, filetype,
-                         &filetypelen ) == ERROR_SUCCESS )
-    {
-	filetype[filetypelen]='\0';
-	TRACE("File type: %s\n", filetype);
-
-	/* Looking for ...buffer\shell\lpOperation\command */
-	strcat( filetype, "\\shell\\" );
-	strcat( filetype, lpOperation );
-	strcat( filetype, "\\command" );
-	
-	if (RegQueryValue16( HKEY_CLASSES_ROOT, filetype, command,
-                             &commandlen ) == ERROR_SUCCESS )
-	{
-            LPSTR tmp;
-            char param[256];
-	    LONG paramlen = 256;
-
-
-	    /* Get the parameters needed by the application 
-	       from the associated ddeexec key */ 
-	    tmp = strstr(filetype,"command");
-	    tmp[0] = '\0';
-	    strcat(filetype,"ddeexec");
-
-	    if(RegQueryValue16( HKEY_CLASSES_ROOT, filetype, param,&paramlen ) == ERROR_SUCCESS)
-	    {
-	      strcat(command," ");
-	      strcat(command,param);
-	      commandlen += paramlen;
-	    }
-
-	    /* Is there a replace() function anywhere? */
-	    command[commandlen]='\0';
-	    strcpy( lpResult, command );
-	    tok=strstr( lpResult, "%1" );
-	    if (tok != NULL)
-	    {
-		tok[0]='\0'; /* truncate string at the percent */
-		strcat( lpResult, xlpFile ); /* what if no dir in xlpFile? */
-		tok=strstr( command, "%1" );
-		if ((tok!=NULL) && (strlen(tok)>2))
-		{
-		    strcat( lpResult, &tok[2] );
-		}
-	    }
-	    retval=33; /* FIXME see above */
-	}
-    }
-    else /* Check win.ini */
-    {
-	/* Toss the leading dot */
-	extension++;
-	if ( GetProfileStringA( "extensions", extension, "", command,
-                                  sizeof(command)) > 0)
-	  {
-		if (strlen(command)!=0)
-		  {
-			strcpy( lpResult, command );
-			tok=strstr( lpResult, "^" ); /* should be ^.extension? */
-			if (tok != NULL)
-			  {
-				tok[0]='\0';
-				strcat( lpResult, xlpFile ); /* what if no dir in xlpFile? */
-				tok=strstr( command, "^" ); /* see above */
-				if ((tok != NULL) && (strlen(tok)>5))
-				  {
-					strcat( lpResult, &tok[5]);
-				  }
-			  }
-			retval=33; /* FIXME - see above */
-		  }
-	  }
-	}
-
-    TRACE("returning %s\n", lpResult);
-    return retval;
-}
-
-/*************************************************************************
- *				ShellExecute		[SHELL.20]
- */
-HINSTANCE16 WINAPI ShellExecute16( HWND16 hWnd, LPCSTR lpOperation,
-                                   LPCSTR lpFile, LPCSTR lpParameters,
-                                   LPCSTR lpDirectory, INT16 iShowCmd )
-{   HINSTANCE16 retval=31;
-    char old_dir[1024];
-    char cmd[1024] = "";
-
-    TRACE("(%04x,'%s','%s','%s','%s',%x)\n",
-		hWnd, lpOperation ? lpOperation:"<null>", lpFile ? lpFile:"<null>",
-		lpParameters ? lpParameters : "<null>", 
-		lpDirectory ? lpDirectory : "<null>", iShowCmd);
-
-    if (lpFile==NULL) return 0; /* should not happen */
-    if (lpOperation==NULL) /* default is open */
-      lpOperation="open";
-
-    if (lpDirectory)
-    { GetCurrentDirectoryA( sizeof(old_dir), old_dir );
-        SetCurrentDirectoryA( lpDirectory );
-    }
-
-    /* First try to execute lpFile with lpParameters directly */ 
-    strcpy(cmd,lpFile);
-    if (lpParameters) {
-        strcat(cmd, " " );
-        strcat(cmd,lpParameters );
-    }
-
-    retval = WinExec16( cmd, iShowCmd );
-
-    /* Unable to execute lpFile directly
-       Check if we can match an application to lpFile */
-    if(retval < 32)
-    { 
-      cmd[0] = '\0';
-      retval = SHELL_FindExecutable( lpFile, lpOperation, cmd );
-
-      if (retval > 32)  /* Found */
-      {
-        if (lpParameters)
-        {
-            strcat(cmd," ");
-            strcat(cmd,lpParameters);
-        }
-        retval = WinExec16( cmd, iShowCmd );
-      }
-      else if(PathIsURLA((LPSTR)lpFile))    /* File not found, check for URL */
-      {
-        char lpstrProtocol[256];
-        LONG cmdlen = 512;
-        LPSTR lpstrRes;
-        INT iSize;
-      
-	lpstrRes = strchr(lpFile,':');
-        iSize = lpstrRes - lpFile;
-	
-        /* Looking for ...protocol\shell\lpOperation\command */
-	strncpy(lpstrProtocol,lpFile,iSize);
-	lpstrProtocol[iSize]='\0';
-        strcat( lpstrProtocol, "\\shell\\" );
-	strcat( lpstrProtocol, lpOperation );
-	strcat( lpstrProtocol, "\\command" );
-	
-	/* Remove File Protocol from lpFile */
-	/* In the case file://path/file     */
-	if(!strncasecmp(lpFile,"file",iSize))
-	{
-	  lpFile += iSize;
-	  while(*lpFile == ':') lpFile++;
-	}
-	
-
-	/* Get the application for the protocol and execute it */
-	if (RegQueryValue16( HKEY_CLASSES_ROOT, lpstrProtocol, cmd,
-                             &cmdlen ) == ERROR_SUCCESS )
-	{
-	    LPSTR tok;
-            LPSTR tmp;
-            char param[256] = "";
-	    LONG paramlen = 256;
-
-	    /* Get the parameters needed by the application 
-	       from the associated ddeexec key */ 
-	    tmp = strstr(lpstrProtocol,"command");
-	    tmp[0] = '\0';
-	    strcat(lpstrProtocol,"ddeexec");
-
-	    if(RegQueryValue16( HKEY_CLASSES_ROOT, lpstrProtocol, param,&paramlen ) == ERROR_SUCCESS)
-	    {
-	      strcat(cmd," ");
-	      strcat(cmd,param);
-	      cmdlen += paramlen;
-	    }
-	    
-	    /* Is there a replace() function anywhere? */
-	    cmd[cmdlen]='\0';
-
-	    tok=strstr( cmd, "%1" );
-	    if (tok != NULL)
-	    {
-		tok[0]='\0'; /* truncate string at the percent */
-		strcat( cmd, lpFile ); /* what if no dir in xlpFile? */
-		tok=strstr( cmd, "%1" );
-		if ((tok!=NULL) && (strlen(tok)>2))
-		{
-		    strcat( cmd, &tok[2] );
-		}
-	    }
- 
-	    retval = WinExec16( cmd, iShowCmd );
-	}
-      }
-    /* Check if file specified is in the form www.??????.*** */
-      else if(!strncasecmp(lpFile,"www",3))
-      {
-	/* if so, append lpFile http:// and call ShellExecute */ 
-        char lpstrTmpFile[256] = "http://"; ;
-	strcat(lpstrTmpFile,lpFile);
-	retval = ShellExecuteA(hWnd,lpOperation,lpstrTmpFile,NULL,NULL,0);
-      }
-    }
-    if (lpDirectory)
-      SetCurrentDirectoryA( old_dir );
-    return retval;
 }
 
 /*************************************************************************
Index: dlls/shell32/Makefile.in
===================================================================
RCS file: /home/cvs/cvsroot/wine/wine/dlls/shell32/Makefile.in,v
retrieving revision 1.42
diff -u -u -r1.42 Makefile.in
--- dlls/shell32/Makefile.in	15 Feb 2002 19:12:38 -0000	1.42
+++ dlls/shell32/Makefile.in	20 Feb 2002 06:05:02 -0000
@@ -32,6 +32,7 @@
 	shellpath.c \
 	shellstring.c \
 	shellreg.c \
+	shlexec.c \
 	shlfileop.c \
 	shlfolder.c \
 	shlview.c \
--- /dev/null	Thu Jan  1 01:00:00 1970
+++ dlls/shell32/shlexec.c	Sat Feb 23 22:20:08 2002
@@ -0,0 +1,552 @@
+/*
+ * 				Shell Library Functions
+ *
+ *  1998 Marcus Meissner
+ *  2002 Eric Pouech
+ */
+
+#include "config.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <assert.h>
+
+#include "windef.h"
+#include "winerror.h"
+#include "winreg.h"
+#include "shellapi.h"
+#include "shlobj.h"
+#include "shlwapi.h"
+#include "ddeml.h"
+
+#include "wine/winbase16.h"
+#include "shell32_main.h"
+
+#include "debugtools.h"
+
+DEFAULT_DEBUG_CHANNEL(exec);
+
+/* this function is supposed to expand the escape sequences found in the registry
+ * some diving reported that the following were used:
+ * + %1, %2...  seem to report to parameter of index N in ShellExecute pmts 
+ + + %*         seem to report to all parameter (or all remaining, ie after removing
+ *              the already used %1 %2...) 
+ * + %L         seems to be %1 as long filename followed by the 8+3 variation 
+ * + %l         unknown
+ * + %S         unknown
+ * + %I         unknown
+ */
+static void argify(char* res, int len, const char* fmt, const char* lpFile)
+{
+    char        xlpFile[1024];
+
+    while (*fmt)
+    {
+        if (*fmt == '%')
+        {
+            switch (*++fmt)
+            {
+            case '\0':
+            case '%': 
+                *res++ = '%'; 
+                break;
+            case '1': 
+                if (SearchPathA(NULL, lpFile, ".exe", sizeof(xlpFile), xlpFile, NULL))
+                {
+                    strcpy(res, xlpFile); 
+                    res += strlen(xlpFile); 
+                }
+                else
+                {
+                    strcpy(res, lpFile); 
+                    res += strlen(lpFile); 
+                }
+                break;
+            default: FIXME("Unknown escape sequence %%%c\n", *fmt);
+            }
+            fmt++;
+        }
+        else
+            *res++ = *fmt++;
+    }
+    *res = '\0';
+}
+
+/*************************************************************************
+ *	SHELL_FindExecutable [Internal]
+ *
+ * Utility for code sharing between FindExecutable and ShellExecute
+ * in: 
+ *      lpFile the name of a file
+ *      lpOperation the operation on it (open)
+ * out:
+ *      lpResult a buffer, big enough :-(, to store the command to do the
+ *              operation on the file
+ *      key a buffer, big enough, to get the key name to do actually the
+ *              command (it'll be used afterwards for more information
+ *              on the operation)
+ */
+static HINSTANCE SHELL_FindExecutable(LPCSTR lpFile, LPCSTR lpOperation,
+                                      LPSTR lpResult, LPSTR key)
+{
+    char *extension = NULL; /* pointer to file extension */
+    char tmpext[5];         /* local copy to mung as we please */
+    char filetype[256];     /* registry name for this filetype */
+    LONG filetypelen = 256; /* length of above */
+    char command[256];      /* command from registry */
+    LONG commandlen = 256;  /* This is the most DOS can handle :) */
+    char buffer[256];       /* Used to GetProfileString */
+    HINSTANCE retval = 31;  /* default - 'No association was found' */
+    char *tok;              /* token pointer */
+    int i;                  /* random counter */
+    char xlpFile[256] = ""; /* result of SearchPath */
+    
+    TRACE("%s\n", (lpFile != NULL) ? lpFile : "-");
+    
+    lpResult[0] = '\0'; /* Start off with an empty return string */
+    
+    /* trap NULL parameters on entry */
+    if ((lpFile == NULL) || (lpResult == NULL) || (lpOperation == NULL))
+    {
+        WARN("(lpFile=%s,lpResult=%s,lpOperation=%s): NULL parameter\n",
+             lpFile, lpOperation, lpResult);
+        return 2; /* File not found. Close enough, I guess. */
+    }
+    
+    if (SearchPathA(NULL, lpFile, ".exe", sizeof(xlpFile), xlpFile, NULL))
+    {
+        TRACE("SearchPathA returned non-zero\n");
+        lpFile = xlpFile;
+    }
+    
+    /* First thing we need is the file's extension */
+    extension = strrchr(xlpFile, '.'); /* Assume last "." is the one; */
+                                       /* File->Run in progman uses */
+                                       /* .\FILE.EXE :( */
+    TRACE("xlpFile=%s,extension=%s\n", xlpFile, extension);
+    
+    if ((extension == NULL) || (extension == &xlpFile[strlen(xlpFile)]))
+    {
+        WARN("Returning 31 - No association\n");
+        return 31; /* no association */
+    }
+    
+    /* Make local copy & lowercase it for reg & 'programs=' lookup */
+    lstrcpynA(tmpext, extension, 5);
+    CharLowerA(tmpext);
+    TRACE("%s file\n", tmpext);
+    
+    /* Three places to check: */
+    /* 1. win.ini, [windows], programs (NB no leading '.') */
+    /* 2. Registry, HKEY_CLASS_ROOT\<filetype>\shell\open\command */
+    /* 3. win.ini, [extensions], extension (NB no leading '.' */
+    /* All I know of the order is that registry is checked before */
+    /* extensions; however, it'd make sense to check the programs */
+    /* section first, so that's what happens here. */
+    
+    if (key) *key = '\0';
+
+    /* See if it's a program - if GetProfileString fails, we skip this
+     * section. Actually, if GetProfileString fails, we've probably
+     * got a lot more to worry about than running a program... */
+    if (GetProfileStringA("windows", "programs", "exe pif bat com",
+                          buffer, sizeof(buffer)) > 0)
+    {
+        for (i = 0;i<strlen(buffer); i++) buffer[i] = tolower(buffer[i]);
+        
+        tok = strtok(buffer, " \t"); /* ? */
+        while (tok!= NULL)
+        {
+            if (strcmp(tok, &tmpext[1]) == 0) /* have to skip the leading "." */
+            {
+                strcpy(lpResult, xlpFile);
+                /* Need to perhaps check that the file has a path
+                 * attached */
+                TRACE("found %s\n", lpResult);
+                return 33;
+                
+		/* Greater than 32 to indicate success FIXME According to the
+		 * docs, I should be returning a handle for the
+		 * executable. Does this mean I'm supposed to open the
+		 * executable file or something? More RTFM, I guess... */
+            }
+            tok = strtok(NULL, " \t");
+        }
+    }
+    
+    /* Check registry */
+    if (RegQueryValueA(HKEY_CLASSES_ROOT, tmpext, filetype,
+                       &filetypelen) == ERROR_SUCCESS)
+    {
+	filetype[filetypelen] = '\0';
+	TRACE("File type: %s\n", filetype);
+        
+	/* Looking for ...buffer\shell\lpOperation\command */
+	strcat(filetype, "\\shell\\");
+	strcat(filetype, lpOperation);
+	strcat(filetype, "\\command");
+	
+	if (RegQueryValueA(HKEY_CLASSES_ROOT, filetype, command,
+                           &commandlen) == ERROR_SUCCESS)
+	{
+            if (key) strcpy(key, filetype);
+#if 0
+            LPSTR tmp;
+            char param[256];
+	    LONG paramlen = 256;
+
+            /* FIXME: it seems all Windows version don't behave the same here.
+             * the doc states that this ddeexec information can be found after
+             * the exec names.
+             * on Win98, it doesn't appear, but I think it does on Win2k
+             */
+	    /* Get the parameters needed by the application 
+	       from the associated ddeexec key */ 
+	    tmp = strstr(filetype, "command");
+	    tmp[0] = '\0';
+	    strcat(filetype, "ddeexec");
+            
+	    if (RegQueryValueA(HKEY_CLASSES_ROOT, filetype, param, &paramlen) == ERROR_SUCCESS)
+	    {
+                strcat(command, " ");
+                strcat(command, param);
+                commandlen += paramlen;
+	    }
+#endif
+	    command[commandlen] = '\0';
+            argify(lpResult, sizeof(lpResult), command, xlpFile);
+	    retval = 33; /* FIXME see above */
+	}
+    }
+    else /* Check win.ini */
+    {
+	/* Toss the leading dot */
+	extension++;
+	if (GetProfileStringA("extensions", extension, "", command,
+                              sizeof(command)) > 0)
+        {
+            if (strlen(command) != 0)
+            {
+                strcpy(lpResult, command);
+                tok = strstr(lpResult, "^"); /* should be ^.extension? */
+                if (tok != NULL)
+                {
+                    tok[0] = '\0';
+                    strcat(lpResult, xlpFile); /* what if no dir in xlpFile? */
+                    tok = strstr(command, "^"); /* see above */
+                    if ((tok != NULL) && (strlen(tok)>5))
+                    {
+                        strcat(lpResult, &tok[5]);
+                    }
+                }
+                retval = 33; /* FIXME - see above */
+            }
+        }
+    }
+    
+    TRACE("returning %s\n", lpResult);
+    return retval;
+}
+
+/******************************************************************
+ *		dde_cb
+ *
+ * callback for the DDE connection. not really usefull
+ */
+static HDDEDATA CALLBACK dde_cb(UINT uType, UINT uFmt, HCONV hConv, 
+                                HSZ hsz1, HSZ hsz2,
+                                HDDEDATA hData, DWORD dwData1, DWORD dwData2)
+{
+    return (HDDEDATA)0;
+}
+
+/******************************************************************
+ *		dde_connect
+ *
+ * ShellExecute helper. Used to do an operation with a DDE connection
+ *
+ * Handles both the direct connection (try #1), and if it fails, 
+ * launching an application and trying (#2) to connect to it
+ *
+ */
+static unsigned dde_connect(char* key, char* start, char* ddeexec, 
+                            const char* lpFile, 
+                            int iCmdShow, BOOL is32)
+{
+    char*       endkey = key + strlen(key);
+    char        app[256], topic[256], ifexec[256], res[256];
+    LONG        applen, topiclen, ifexeclen;
+    char*       exec;
+    DWORD       ddeInst = 0;
+    DWORD       tid;
+    HSZ         hszApp, hszTopic;
+    HCONV       hConv;
+    unsigned    ret = 31;
+
+    strcpy(endkey, "\\application");
+    applen = sizeof(app);
+    if (RegQueryValueA(HKEY_CLASSES_ROOT, key, app, &applen) != ERROR_SUCCESS)
+    {
+        FIXME("default app name NIY %s\n", key);
+        return 2;
+    }
+    
+    strcpy(endkey, "\\topic");
+    topiclen = sizeof(topic);
+    if (RegQueryValueA(HKEY_CLASSES_ROOT, key, topic, &topiclen) != ERROR_SUCCESS)
+    {
+        strcpy(topic, "System");
+    }
+    
+    if (DdeInitializeA(&ddeInst, dde_cb, APPCMD_CLIENTONLY, 0L) != DMLERR_NO_ERROR)
+    {
+        return 2;
+    }
+    
+    hszApp = DdeCreateStringHandleA(ddeInst, app, CP_WINANSI);
+    hszTopic = DdeCreateStringHandleA(ddeInst, topic, CP_WINANSI);
+    
+    hConv = DdeConnect(ddeInst, hszApp, hszTopic, NULL);
+    exec = ddeexec;
+    if (!hConv)
+    {
+        TRACE("Launching '%s'\n", start);
+        ret = (is32) ? WinExec(start, iCmdShow) : WinExec16(start, iCmdShow);
+        if (ret < 32)
+        {
+            TRACE("Couldn't launch\n");
+            goto error;
+        }
+        hConv = DdeConnect(ddeInst, hszApp, hszTopic, NULL);
+        if (!hConv)
+        {
+            ret = 30; /* whatever */
+            goto error;
+        }
+        strcpy(endkey, "\\ifexec");
+        ifexeclen = sizeof(ifexec);
+        if (RegQueryValueA(HKEY_CLASSES_ROOT, key, ifexec, &ifexeclen) == ERROR_SUCCESS)
+        {
+            exec = ifexec;
+        }
+    }
+    
+    argify(res, sizeof(res), exec, lpFile);
+    TRACE("%s %s => %s\n", exec, lpFile, res);
+    
+    ret = (DdeClientTransaction(res, strlen(res) + 1, hConv, 0L, 0, 
+                                XTYP_EXECUTE, 10000, &tid) != DMLERR_NO_ERROR) ? 31 : 32;
+    DdeDisconnect(hConv);
+ error:
+    DdeUninitialize(ddeInst);
+    return ret;
+}
+
+static HINSTANCE execute_from_key(LPSTR key, LPCSTR lpFile, INT iShowCmd, BOOL is32)
+{
+    char cmd[1024] = "";
+    LONG cmdlen = sizeof(cmd);
+    HINSTANCE retval = 31;
+
+    /* Get the application for the registry */
+    if (RegQueryValueA(HKEY_CLASSES_ROOT, key, cmd, &cmdlen) == ERROR_SUCCESS)
+    {
+        LPSTR tmp;
+        char param[256] = "";
+        LONG paramlen = 256;
+                
+        /* Get the parameters needed by the application 
+           from the associated ddeexec key */ 
+        tmp = strstr(key, "command");
+        assert(tmp);
+        strcpy(tmp, "ddeexec");
+                
+        if (RegQueryValueA(HKEY_CLASSES_ROOT, key, param, &paramlen) == ERROR_SUCCESS)
+        {
+            TRACE("Got ddeexec %s => %s\n", key, param);
+            retval = dde_connect(key, cmd, param, lpFile, iShowCmd, is32);
+        }
+        else
+        {
+            /* Is there a replace() function anywhere? */
+            cmd[cmdlen] = '\0';
+            argify(param, sizeof(param), cmd, lpFile);
+
+            retval = (is32) ? WinExec(param, iShowCmd) : WinExec16(param, iShowCmd);
+        }
+    }
+    else TRACE("ooch\n");
+
+    return retval;
+}
+
+static HINSTANCE SHELL_Execute(HWND hWnd, LPCSTR lpOperation, LPCSTR lpFile, 
+                               LPCSTR lpParameters, LPCSTR lpDirectory, 
+                               INT iShowCmd, BOOL is32)
+{
+    HINSTANCE retval = 31;
+    char old_dir[1024];
+    char cmd[1024];
+    
+    TRACE("(%04x,'%s','%s','%s','%s',%x)\n",
+          hWnd, lpOperation ? lpOperation:"<null>", lpFile ? lpFile:"<null>",
+          lpParameters ? lpParameters : "<null>", 
+          lpDirectory ? lpDirectory : "<null>", iShowCmd);
+    
+    if (lpFile == NULL) return 0; /* should not happen */
+    if (lpOperation == NULL) /* default is open */
+        lpOperation = "open";
+    
+    if (lpDirectory)
+    {
+        GetCurrentDirectoryA(sizeof(old_dir), old_dir);
+        SetCurrentDirectoryA(lpDirectory);
+    }
+    
+    /* First try to execute lpFile with lpParameters directly */ 
+    strcpy(cmd, lpFile);
+    if (lpParameters) 
+    {
+        strcat(cmd, " ");
+        strcat(cmd, lpParameters);
+    }
+    
+    retval = (is32) ? WinExec(cmd, iShowCmd) : WinExec16(cmd, iShowCmd);
+    
+    /* Unable to execute lpFile directly
+       Check if we can match an application to lpFile */
+    if (retval < 32)
+    { 
+        char lpstrProtocol[256];
+
+        cmd[0] = '\0';
+        retval = SHELL_FindExecutable(lpFile, lpOperation, cmd, lpstrProtocol);
+        
+        if (retval > 32)  /* Found */
+        {
+            TRACE("%s/%s => %s/%s\n", lpFile, lpOperation, cmd, lpstrProtocol);
+            if (*lpstrProtocol)
+                retval = execute_from_key(lpstrProtocol, lpFile, iShowCmd, is32);
+            else
+                retval = (is32) ? WinExec(cmd, iShowCmd) : WinExec16(cmd, iShowCmd);
+        }
+        else if (PathIsURLA((LPSTR)lpFile))    /* File not found, check for URL */
+        {
+            LPSTR lpstrRes;
+            INT iSize;
+            
+            lpstrRes = strchr(lpFile, ':');
+            iSize = lpstrRes - lpFile;
+            
+            TRACE("Got URL: %s\n", lpFile);
+            /* Looking for ...protocol\shell\lpOperation\command */
+            strncpy(lpstrProtocol, lpFile, iSize);
+            lpstrProtocol[iSize] = '\0';
+            strcat(lpstrProtocol, "\\shell\\");
+            strcat(lpstrProtocol, lpOperation);
+            strcat(lpstrProtocol, "\\command");
+            
+            /* Remove File Protocol from lpFile */
+            /* In the case file://path/file     */
+            if (!strncasecmp(lpFile, "file", iSize))
+            {
+                lpFile += iSize;
+                while (*lpFile == ':') lpFile++;
+            }
+            
+            retval = execute_from_key(lpstrProtocol, lpFile, iShowCmd, is32);
+        }       
+        /* Check if file specified is in the form www.??????.*** */
+        else if (!strncasecmp(lpFile, "www", 3))
+        {
+            /* if so, append lpFile http:// and call ShellExecute */ 
+            char lpstrTmpFile[256] = "http://"; ;
+            strcat(lpstrTmpFile, lpFile);
+            retval = ShellExecuteA(hWnd, lpOperation, lpstrTmpFile, NULL, NULL, 0);
+        }
+    }
+    if (lpDirectory)
+        SetCurrentDirectoryA(old_dir);
+    return retval;
+}
+
+/*************************************************************************
+ * FindExecutableA			[SHELL32.@]
+ */
+HINSTANCE WINAPI FindExecutableA(LPCSTR lpFile, LPCSTR lpDirectory, LPSTR lpResult)
+{ 
+    HINSTANCE retval = 31;    /* default - 'No association was found' */
+    char old_dir[1024];
+    
+    TRACE("File %s, Dir %s\n", 
+          (lpFile != NULL ? lpFile : "-"), (lpDirectory != NULL ? lpDirectory : "-"));
+
+    lpResult[0] = '\0'; /* Start off with an empty return string */
+
+    /* trap NULL parameters on entry */
+    if ((lpFile == NULL) || (lpResult == NULL))
+    {
+        /* FIXME - should throw a warning, perhaps! */
+	return 2; /* File not found. Close enough, I guess. */
+    }
+
+    if (lpDirectory)
+    {
+        GetCurrentDirectoryA(sizeof(old_dir), old_dir);
+        SetCurrentDirectoryA(lpDirectory);
+    }
+    
+    retval = SHELL_FindExecutable(lpFile, "open", lpResult, NULL);
+    
+    TRACE("returning %s\n", lpResult);
+    if (lpDirectory)
+        SetCurrentDirectoryA(old_dir);
+    return retval;
+}
+
+/*************************************************************************
+ * FindExecutableW			[SHELL32.@]
+ */
+HINSTANCE WINAPI FindExecutableW(LPCWSTR lpFile, LPCWSTR lpDirectory, LPWSTR lpResult)
+{
+    FIXME("(%p,%p,%p): stub\n", lpFile, lpDirectory, lpResult);
+    return 31;    /* default - 'No association was found' */
+}
+
+/*************************************************************************
+ *				ShellExecute		[SHELL.20]
+ */
+HINSTANCE16 WINAPI ShellExecute16( HWND16 hWnd, LPCSTR lpOperation,
+                                   LPCSTR lpFile, LPCSTR lpParameters,
+                                   LPCSTR lpDirectory, INT16 iShowCmd )
+{   
+    return (HINSTANCE16)SHELL_Execute(hWnd, lpOperation, lpFile, 
+                                      lpParameters, lpDirectory, iShowCmd, FALSE );
+}
+
+/*************************************************************************
+ * ShellExecuteA			[SHELL32.290]
+ */
+HINSTANCE WINAPI ShellExecuteA(HWND hWnd, LPCSTR lpOperation,LPCSTR lpFile, 
+                               LPCSTR lpParameters,LPCSTR lpDirectory, INT iShowCmd)
+{
+    TRACE("\n");
+    return SHELL_Execute( hWnd, lpOperation, lpFile, lpParameters,
+                          lpDirectory, iShowCmd, TRUE );
+}
+
+/*************************************************************************
+ * ShellExecuteW			[SHELL32.294]
+ * from shellapi.h
+ * WINSHELLAPI HINSTANCE APIENTRY ShellExecuteW(HWND hwnd, LPCWSTR lpOperation, 
+ * LPCWSTR lpFile, LPCWSTR lpParameters, LPCWSTR lpDirectory, INT nShowCmd);   
+ */
+HINSTANCE WINAPI ShellExecuteW(HWND hwnd, LPCWSTR lpOperation, LPCWSTR lpFile, 
+                               LPCWSTR lpParameters, LPCWSTR lpDirectory, INT nShowCmd)
+{
+       FIXME(": stub\n");
+       return 0;
+}
+

[Index of Archives]     [Gimp for Windows]     [Red Hat]     [Samba]     [Yosemite Camping]     [Graphics Cards]     [Wine Home]

  Powered by Linux