hey folks, i'm having some trouble with technotrend s2-3200 dvb-s card [ https://www.linuxtv.org/wiki/index.php/TechnoTrend_TT-budget_S2-3200 ] Card is being recognized:
05:04.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH S2-3200
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at fdcfe000 (32-bit, non-prefetchable) [size=512]
Kernel driver in use: budget_ci dvb
Kernel modules: budget_ciMy Kernel: 4.14.11-1-ARCH.It works fine with w_scan or tvheadend I can watch many stations on multiple satelites without any problems, however when trying to tune anything with a symbol rate lower then 5000 (5 Msymbols/s) the driver does not seem to support it, see below messages from w_scan when trying. This makes me miss many stations I'd like to receive.
However, the manufacturer clearly indicates the card supports symbol rates starting as low as 2000 (2 Msymbols/s), [ http://www.tt-downloads.de/Update/engl/techspec_tt-budget_s2-3200_en.pdf ] so the driver needs to be adjusted I guess? How can I make it work or adjust the driver for this?
However, the manufacturer clearly indicates the card supports symbol rates starting as low as 2000 (2 Msymbols/s), [ http://www.tt-downloads.de/Update/engl/techspec_tt-budget_s2-3200_en.pdf ] so the driver needs to be adjusted I guess? How can I make it work or adjust the driver for this?
trying 'S2 f = 12138 kHz H SR = 14580 2/3 0,AUTO 8PSK (0:0:0)'
(time: 02:59.734)
trying 'S f = 12515 kHz H SR = 8888 3/4 0,35 QPSK (0:0:0)'
(time: 03:02.894)
trying 'S f = 12525 kHz V SR = 30000 5/6 0,35 QPSK (0:0:0)'
(time: 03:05.424)
trying 'S f = 12544 kHz H SR = 24000 5/6 0,35 QPSK (0:0:0)'
(time: 03:09.274)
trying 'S f = 12562 kHz V SR = 25000 5/6 0,35 QPSK (0:0:0)'
(time: 03:12.394)
trying 'S f = 12571 kHz H SR = 2800 3/4 0,35 QPSK (0:0:0)'
(time: 03:15.933) skipped: (srate 2800000 unsupported by driver)
initial_tune:2813: Setting frontend failed S f = 12571 kHz H SR = 2800 3/4 0,35 QPSK (0:0:0)
trying 'S f = 12577 kHz H SR = 2590 5/6 0,35 QPSK (0:0:0)'
(time: 03:16.447) skipped: (srate 2590000 unsupported by driver)
initial_tune:2813: Setting frontend failed S f = 12577 kHz H SR = 2590 5/6 0,35 QPSK (0:0:0)
trying 'S f = 12588 kHz V SR = 2260 5/6 0,35 QPSK (0:0:0)'
(time: 03:17.660) skipped: (srate 2260000 unsupported by driver)
initial_tune:2813: Setting frontend failed S f = 12588 kHz V SR = 2260 5/6 0,35 QPSK (0:0:0)
trying 'S f = 12592 kHz H SR = 8888 3/4 0,35 QPSK (0:0:0)'
(time: 03:18.893)
trying 'S f = 12592 kHz V SR = 2220 5/6 0,35 QPSK (0:0:0)'
(time: 03:23.487) skipped: (srate 2220000 unsupported by driver)
initial_tune:2813: Setting frontend failed S f = 12592 kHz V SR = 2220 5/6 0,35 QPSK (0:0:0)
trying 'S f = 12596 kHz V SR = 3700 5/6 0,35 QPSK (0:0:0)'
(time: 03:24.003) skipped: (srate 3700000 unsupported by driver)
initial_tune:2813: Setting frontend failed S f = 12596 kHz V SR = 3700 5/6 0,35 QPSK (0:0:0)
trying 'S f = 12601 kHz H SR = 4400 3/4 0,35 QPSK (0:0:0)'
(time: 03:25.993) skipped: (srate 4400000 unsupported by driver)thanks in advance!
_______________________________________________ vdr mailing list vdr@xxxxxxxxxxx https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
