Re: Trouble with DVB-T2 on frontend 1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I have another card with the same problem, it has frontend0 and frontend1and I modify vdr to open always demux0 dvr0 and net0 instead of demux1, dvr1 and net1, and work well with my card.

Jose Alberto

Enviado desde mi Huawei


-------- Mensaje original --------
Asunto: Re: [vdr] Trouble with DVB-T2 on frontend 1
De: Marko M鋕el�
Para: VDR Mailing List
CC:


On Wed, Nov 29, 2017 at 11:13:24AM +0100, Klaus Schmidinger wrote:
>>The second startup is for a tweak where I removed
>>/dev/dvb/adapter0/frontend0 and renamed frontend1 to frontend0. On
>>this startup, VDR will not complain anything, but it will not find any
>>signal either. It properly detects the MN88473, but perhaps improperly
>>claims that it provides DVB-T along with DVB-T2 and DVB-C.
>
>Well, from the information that VDR gets from the driver, it does
>support DVB-T, -T2 and -C:
>
> frontend 0/0 provides DVB-T,DVB-T2,DVB-C with
> QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Panasonic MN88473")
>
>If this is not correct, I assume it's a driver problem.

I made some further experiments today. It turns out that frontend1
indeed supports both DVB-T and DVB-T2 (and presumably DVB-C).

Furthermore, with the trick
sudo mv /dev/dvb/adapter0/frontend1 /dev/dvb/adapter0/frontend0
I got VDR to display both DVB-T and DVB-T2 programs. The only difference
from my previous attempts was that this time, I did not rename the old
frontend0 to frontend2. The only frontend device descriptor that existed
in the file system was frontend0.

The reception is not the best here (especially on windy or rainy days,
in particular with DVB-T2), and it is possible that during my previous
attempts, the DVB-T2 signal was too weak to get the tuner to lock on it
in reasonable time. Also, the USB stick might not have the best analog
signal path or the best tuner.

So, the good news is that the device indeed works with this little
tweak. It probably is not worth the effort to implement something in
dvbdevice.c that would allow this device to work without tweaking
/dev/dvb/.

Now I will only have to figure out how to get the remote control to
work.

Best regards,

Marko

_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
https://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr

[Index of Archives]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Util Linux NG]     [Xfree86]     [Big List of Linux Books]     [Fedora Users]     [Fedora Women]     [ALSA Devel]     [Linux USB]

  Powered by Linux