On 24.01.2010 19:22, André Weidemann wrote: > On 24.01.2010 18:14, Klaus Schmidinger wrote: >> On 24.01.2010 17:24, André Weidemann wrote: >>> Hi Klaus, >>> >>> On 24.01.2010 16:28, Klaus Schmidinger wrote: >>>> On 11.01.2010 06:19, VDR User wrote: >>>>> On Sun, Jan 10, 2010 at 12:30 AM, Giampaolo Sica<gpsica@xxxxxx> >>>>> wrote: >>>>>> My Samsung linux based TV set (http://samygo.sourceforge.net/) won't >>>>>> play >>>>>> .TS without PCR (both h.264 and mpeg2). >>>>>> Windows media player in windows 7 can play mpeg2 and H.264 .TS only >>>>>> with PCR >>>>>> pid. >>>>>> I haven't tried any other player. >>>>> >>>>> I would say your problem should be addressed within your hacked tv >>>>> firmware. However, if there is a real need for PCR then I'm sure >>>>> Klaus will consider it. >>>> >>>> In an attempt to debug this I just made some recordings from channels >>>> with VPID==PPID and VPID!=PPID, namely >>>> >>>> RTL Television,RTL;RTL >>>> World:12187:hC34M2O0S0:S19.2E:27500:163=2:104=deu;106=deu:105:0:12003:1:1089:0 >>>> >>>> >>>> BVN;CANALDIGITAAL:12574:hC56M2O0S0:S19.2E:22000:515+8190=2:96=dut:36:0:5025:53:1109:0 >>>> >>>> >>>> >>>> Both recordings were replayed without problems using the Windows Media >>>> Player >>>> on Windows XP. It didn't even make a difference whether the PCR pid in >>>> the >>>> PMT was set to an actual value or to 0x1FFF. >>>> >>>> I was under the impression that the WMP was one of those players >>>> that have problems if there is no PCR, but apparently it plays just >>>> fine... >>> >>> Could you please do a quick test with VLC 1.0.3 under Windows? I cannot >>> replay any recordings made from AnixeHD recorded with vdr-1.7.11. Upon >>> replay I only get a still picture of the first recorded frame. >> >> Are you referring to >> >> ANIXE >> HD;BetaDigital:10832:hC23M5O35S1:S19.2E:22000:767=27:0;771=deu:0:1:61202:1:1057:0 >> > > Yes, this is it. > >> --- remux.c 2010/01/23 15:39:15 2.38 >> +++ remux.c 2010/01/24 15:18:29 2.39 >> @@ -295,7 +295,7 @@ >> numPmtPackets = 0; >> if (Channel) { >> int Vpid = Channel->Vpid(); >> - int Ppid = 0x1FFF; // no PCR pid >> + int Ppid = Channel->Ppid(); >> uchar *p = buf; >> int i = 0; >> p[i++] = 0x02; // table id >> >> That should fix it - this channel doesn't have a separate PCR pid. > > The above patch fixes the replay problem with VLC. Thank you. Have you tested with both versions, PPID==VPID and PPID!=VPID? Klaus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
