Hi Klaus,
On 24.01.2010 16:28, Klaus Schmidinger wrote:
On 11.01.2010 06:19, VDR User wrote:
On Sun, Jan 10, 2010 at 12:30 AM, Giampaolo Sica<gpsica@xxxxxx> wrote:
My Samsung linux based TV set (http://samygo.sourceforge.net/) won't play
.TS without PCR (both h.264 and mpeg2).
Windows media player in windows 7 can play mpeg2 and H.264 .TS only with PCR
pid.
I haven't tried any other player.
I would say your problem should be addressed within your hacked tv
firmware. However, if there is a real need for PCR then I'm sure
Klaus will consider it.
In an attempt to debug this I just made some recordings from channels
with VPID==PPID and VPID!=PPID, namely
RTL Television,RTL;RTL World:12187:hC34M2O0S0:S19.2E:27500:163=2:104=deu;106=deu:105:0:12003:1:1089:0
BVN;CANALDIGITAAL:12574:hC56M2O0S0:S19.2E:22000:515+8190=2:96=dut:36:0:5025:53:1109:0
Both recordings were replayed without problems using the Windows Media Player
on Windows XP. It didn't even make a difference whether the PCR pid in the
PMT was set to an actual value or to 0x1FFF.
I was under the impression that the WMP was one of those players
that have problems if there is no PCR, but apparently it plays just fine...
Could you please do a quick test with VLC 1.0.3 under Windows? I cannot
replay any recordings made from AnixeHD recorded with vdr-1.7.11. Upon
replay I only get a still picture of the first recorded frame.
Regards
André
_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
