What is the input resolution and do they change? What is your output resolution set to? On 2/15/09, Torgeir Veimo <torgeir@xxxxxxxxx> wrote: >> On 3 Feb 2009, at 00:58, Theunis Potgieter wrote: >> >> > There is a VGA -> RGB connector that you can assemble/buy. I've seen >> > in the xorg.conf that you can still force your VGA out to run on >> 50Hz, >> > by disabling EDID on the nvidia xorg.conf Options. >> >> >> Yes this is what I'll be trying, but I'll just get an nvidia component >> breakout box, they're about $10 on ebay. > It appears that the component output breakout cable still uses the > tvencoder chip.. > > I was able to avoid tearing finally (!) by disabling the composite > extension. > > Section "Extensions" > Option "Composite" "Disable" > EndSection > > I then got pixel perfect component pal output without overscan. But > now i'm left with.. judder !!! > > Watching live sports i get judder, it almost looks like it's dropping > every even or odd field.. It might be that it's just that field parity > is not observed, but it's a bit hard to make out. > > Am beginning to think that nvidia hardware is useless for 50Hz pal > output.. > > -- > Torgeir Veimo > torgeir@xxxxxxxxx > > > > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > -- Sent from my mobile device _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
