> > > Gents, could you please run vdr-sxfe with "--verbose" flag and check if > > you > > > see the "prebuffer=" line in console output when you switch the channel? > > > > is it possible to use --verbose option for local frontend > > > > ./vdr -c /etc/vdr/ -P xineliboutput > > try ./vdr -c /etc/vdr/ -P'xineliboutput --verbose' I have already tried so , wrong argument Hereafter you can find the explanation from xineliboutput author ============================================================= In local mode logging level is controlled by VDR. Verbose logging is enabled when it is enabled in VDR, as was in your log attachment. - Petri ============================================================= > > I couldn't run it with --verbose option > > > > I don't use any remote frontends > > > > btw - I corrected the my diseqs.conf > > > > > > from > > > > S36.0E 00000 V 10750 t v W15 [E0 10 38 F4] W15 t > > S36.0E 99999 V 10750 t v W15 [E0 10 38 F5] W15 T > > S36.0E 00000 H 10750 t V W15 [E0 10 38 F6] W15 t > > S36.0E 99999 H 10750 t V W15 [E0 10 38 F7] W15 T > > > > to > > > > S36.0E 00000 V 10750 t v [E0 10 38 F4] > > S36.0E 99999 V 10750 t v [E0 10 38 F5] T > > S36.0E 00000 H 10750 t V [E0 10 38 F6] > > S36.0E 99999 H 10750 t V [E0 10 38 F7] T > > I have 8-1 disecq switch that requires 2 commands to be sent (commited and > uncommited), so my case even more complicated :( > But I think your change saves about 50 mSec (30 you removed and few more > that driver add for every command sent). I will watch on this Goga _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
