> Gents, could you please run vdr-sxfe with "--verbose" flag and check if you > see the "prebuffer=" line in console output when you switch the channel? is it possible to use --verbose option for local frontend ./vdr -c /etc/vdr/ -P xineliboutput I couldn't run it with --verbose option I don't use any remote frontends btw - I corrected the my diseqs.conf from S36.0E 00000 V 10750 t v W15 [E0 10 38 F4] W15 t S36.0E 99999 V 10750 t v W15 [E0 10 38 F5] W15 T S36.0E 00000 H 10750 t V W15 [E0 10 38 F6] W15 t S36.0E 99999 H 10750 t V W15 [E0 10 38 F7] W15 T to S36.0E 00000 V 10750 t v [E0 10 38 F4] S36.0E 99999 V 10750 t v [E0 10 38 F5] T S36.0E 00000 H 10750 t V [E0 10 38 F6] S36.0E 99999 H 10750 t V [E0 10 38 F7] T and the switching time decreased , till 2 seconds Goga > Please state the number you see there and please write again your vdr, > xine-lib and xinelibout versions. > > Thanks. > > > 2008/12/11 Rolf Ahrenberg <rahrenbe@xxxxxxxxx> > > > On Thu, 11 Dec 2008, Goga777 wrote: > > > > > 4. vdr 1.7.0(1) xineliboutput, directfb - 2-3 sec, xineliboutput, x11 - > > 2-4 sec > > > seems it's due to of tcp/ip and pipes which are using xineliboutput > > > > Well, I have vdr-1.6.0 and xinelibout-cvs with vdr-sxfe on my > > development setup using latest kernel drivers (S2API, DVB-T card) and > > haven't ever noticed as slow zapping as you documented: the channel > > switching time is about one second. > > > > BR, _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr