Frank Schmirler a écrit : > On Mon, 24 Nov 2008 21:41:54 +0100, Nicolas Huillard wrote >> This also works around an annoying bug in the (non-upgraded) EPIA >> BIOS: the PXE LAN boot does not always initialize the network >> interface after a shutdown. One have to unplug power to boot >> correctly next time... > > Current via-rhine drivers have a module option to fix this: via-rhine.avoid_D3=1 > For older kernes there's a patch: http://lkml.org/lkml/2004/9/17/242 I was sure it wouldn't hurt to ask on this ML... Next question : where should I put this ? https://fcp.surfsite.org/modules/newbb/viewtopic.php?viewmode=thread&topic_id=33621&forum=10&post_id=148956 says I should insert it in the initrd, but it's a bit difficult in my case (the same kernel/initrd is shared by many clients)... I'd try to insert it on the PXE kernel command-line, but it's explicitely ignored by the kernel : ml6000 kernel: Unknown boot option `via_rhine.avoid_D3=1': ignoring ...or implicitely, when I just add "avoid_D3=1" (ie. PXE does not boot after the next shutdown) -- NH _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
