On Mon, 24 Nov 2008 21:41:54 +0100, Nicolas Huillard wrote > Alex Betis a écrit : > > On Mon, Nov 24, 2008 at 3:24 PM, Nicolas Huillard > > Guys, > > How about putting the system in suspend mode instead of powering it off and > > on again? Should take few seconds. > > Suspend to RAM as always been a pain in my various trials, but this > is a much simpler goal than a complete laptop. Virtually no device > to take down/bring up on a pure streamdev client. NFS handles must > just survive the long delay, but it should be OK. 7 seconds until I get a picture on my EPIA 6000. And this is still pretty long, as I need to upload DXR3 firmware first, then start VDR. > This also works around an annoying bug in the (non-upgraded) EPIA > BIOS: the PXE LAN boot does not always initialize the network > interface after a shutdown. One have to unplug power to boot > correctly next time... Current via-rhine drivers have a module option to fix this: via-rhine.avoid_D3=1 For older kernes there's a patch: http://lkml.org/lkml/2004/9/17/242 Frank _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
