spe@xxxxxxxxxx schrieb: > Hello, > > I had a 1.5.13 running for a while on a nexus FF. > > I did install a second card, S2-3200, together with the multiproto driver > and vdr 1.7.0, without patches at this moment, because I am not interested > in HD at this time. I am just looking to have 2 cards working to be able > to stream on several vdr clients and use the output of my FF card. The S2 > card is on astra, and the FF on hotbird > > I started with a “clean” vdrconf directory, and with a channel.conf with > only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, > but it did only for a few. > > After starting the first time, it scanned about 10 new channels and stops > there. In the DVB menu, update stands on “add new transponder” > > I did try with an other channel.conf. I can see every FTA channel on > hotbird, but I have a black screen on astra (nothing as “channel not > available”). > > The log does’nt learn me something either. In fact the log is flooded by > kernel messages about stb6100 that get_frequence and bandwith. The > frequence are always the same. > -why is the “autoscan” not working ? Do I need some “transponder file” ? > > -how can I check the signal on my S2-3200 card ? > > -how can I reduce the logs from stb6100 ? > > -do I need to apply a concurrent recording patch to be able to stream 2 or > more signals ? > > thanks for your help > > sp > > > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr Errm, you say you have two FF-Cards, one connected to an LNB poniting hotbird and one connected to another LNB pointing to Astra? AFAIk this will NOT work. if vdr has 2 cards, it only uses the second card to do channel-scan, it does not know these two cards are hardwired to different sat-positions, and i know of now way to tell it about such a confguration. Is this correct Klaus? Christoph _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
