Hello, I had a 1.5.13 running for a while on a nexus FF. I did install a second card, S2-3200, together with the multiproto driver and vdr 1.7.0, without patches at this moment, because I am not interested in HD at this time. I am just looking to have 2 cards working to be able to stream on several vdr clients and use the output of my FF card. The S2 card is on astra, and the FF on hotbird I started with a ?clean? vdrconf directory, and with a channel.conf with only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, but it did only for a few. After starting the first time, it scanned about 10 new channels and stops there. In the DVB menu, update stands on ?add new transponder? I did try with an other channel.conf. I can see every FTA channel on hotbird, but I have a black screen on astra (nothing as ?channel not available?). The log does?nt learn me something either. In fact the log is flooded by kernel messages about stb6100 that get_frequence and bandwith. The frequence are always the same. -why is the ?autoscan? not working ? Do I need some ?transponder file? ? -how can I check the signal on my S2-3200 card ? -how can I reduce the logs from stb6100 ? -do I need to apply a concurrent recording patch to be able to stream 2 or more signals ? thanks for your help sp _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
