> I had a 1.5.13 running for a while on a nexus FF. > > I did install a second card, S2-3200, together with the multiproto driver do you use the latest multiproto's version ? > and vdr 1.7.0, without patches at this moment, because I am not interested > in HD at this time. I am just looking to have 2 cards working to be able > to stream on several vdr clients and use the output of my FF card. The S2 > card is on astra, and the FF on hotbird > > I started with a clean vdrconf directory, and with a channel.conf with > only 1 entry (TV5) on hotbird. I hoped that vdr would scan new channels, > but it did only for a few. > After starting the first time, it scanned about 10 new channels and stops > there. In the DVB menu, update stands on add new transponder how did you start the scanning on vdr ? > I did try with an other channel.conf. I can see every FTA channel on > hotbird, but I have a black screen on astra (nothing as channel not > available ). > > The log does nt learn me something either. In fact the log is flooded by > kernel messages about stb6100 that get_frequence and bandwith. The > frequence are always the same. > -why is the autoscan not working ? Do I need some transponder file ? there's reelchannelscan plugin 0.4.1 It works with dvb-s channels on vdr170 , not with dvb-s2. > -how can I check the signal on my S2-3200 card ? femon-plugin will helpto you > -how can I reduce the logs from stb6100 ? have a look on verbose option for stb6100 module - modinfo stb6100 > -do I need to apply a concurrent recording patch to be able to stream 2 or > more signals ? which patch do you mean ? Igor _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
