OK.
In order to get the correct info from a v4l2-ctl --all:
Format:
Type : VBI Capture
Sampling Rate : 27000000 Hz
Offset : 248 samples (9.18519e-06 secs after leading edge)
Samples per Line: 1440
Sample Format : GREY
Start 1st Field : 6
Count 1st Field : 18
Start 2nd Field : 318
Count 2nd Field : 18
Video input : 0 (Tuner 1)
Audio input : 0 (Tuner 1)
Frequency: 1440000 (90.000000 MHz)
Video standard = 0x000000ff
PAL-B/B1/G/H/I/D/D1/K
Tuner:
Capabilities : @@ -881,12 +881,19 @@
bool cPvrDevice::Tune(int freq)
{
struct v4l2_frequency vf;
+ int freqaux = freq;
memset(&vf, 0, sizeof(vf));
vf.tuner = 0;
- vf.type = V4L2_TUNER_ANALOG_TV;
+ if (freq < 88000000)
+ vf.type = V4L2_TUNER_ANALOG_TV;
+ else
+ {
+ log(3, "Changing to RADIO");
+ vf.type = V4L2_TUNER_RADIO;
+ freqaux = freq * 1000;
+ }
vf.frequency = (int) ((double) freq * 16.0 / 1000.0 + 0.5);
-
if (IOCTL(video_fd, VIDIOC_S_FREQUENCY, &vf) != 0)
{
log(0, "Error tuning to %d: %s", freq, strerror(errno));
62.5 Hz stereo
Frequency range : 65.0 MHz - 108.0 MHz
Signal strength : 50%
Current audio mode : stereo
Available subchannels: stereo
I patched as follows:
> Thanks Jose - that's a great help!
>
>> El Martes, 13 de Febrero de 2007 12:16, Jose Alberto Reguero escribi?:
>>> I use this modified code in device.c (pvrinput):
>>>
>>> bool cPvrDevice::Tune(int freq)
>>> {
>>> struct v4l2_frequency vf;
>>> int freqaux = freq;
>>>
>>> memset(&vf, 0, sizeof(vf));
>>> vf.tuner = 0;
>>> if (freq > 180000)
>>> vf.type = V4L2_TUNER_ANALOG_TV;
>>> else
>>> {
>>> vf.type = V4L2_TUNER_RADIO;
>>> freqaux = freq * 1000;
>>> }
>>> vf.frequency = (int) ((double) freqaux * 16.0 / 1000.0 + 0.5);
>>>
>>> if (IOCTL(video_fd, VIDIOC_S_FREQUENCY, &vf) != 0)
>>> {
>>> log(0, "Error tuning to %d: %s", freq,
>>> strerror(errno));
>>> return false;
>>> }
>>> frequency = freq;
>>> return true;
>>> }
>>>
>>> But I have some problems with radio(pvrinput), and xineliboutput.
>>
>> The problem I have is that after a while sound is distorted an finally
>> sound
>> stop. There is not any messages in the log. I don't know if is pvrinput
>> or
>> xineliboutput fault.
>>
>> Jose Alberto
>>
>>>
>>> Jose Alberto
>>>
>>> El Martes, 13 de Febrero de 2007 11:01, Simon Baxter escribi?:
>>> > It looks like this plugin does something wrong with the analog radio
>>> on
>>> > the OEM PVR-150 card.
>>> >
>>> > With channels.conf set to:
>>> > Radio 91ZM:90900:I999C0:C:0:0:300:305:A1:12003:1:1007:0
>>> >
>>> > v4l2-ctl --all looks like this:
>>> >
>>> > Audio input : 0 (Tuner 1)
>>> > Frequency: 1454 (90.875000 MHz)
>>> > Video standard = 0x000000ff
>>> > PAL-B/B1/G/H/I/D/D1/K
>>> > Tuner:
>>> > Capabilities : 62.5 kHz multi-standard
>>> > Frequency range : 44.0 MHz - 958.0 MHz
>>> > Signal strength : 0%
>>> > Current audio mode : mono
>>> > Available subchannels:
>>> >
>>> >
>>> > Where ivtv-radio -f90 looks like this:
>>> >
>>> > Audio input : 0 (Tuner 1)
>>> > Frequency: 1454400 (90.900000 MHz)
>>> > Video standard = 0x000000ff
>>> > PAL-B/B1/G/H/I/D/D1/K
>>> > Tuner:
>>> > Capabilities : 62.5 Hz stereo
>>> > Frequency range : 65.0 MHz - 108.0 MHz
>>> > Signal strength : 50%
>>> > Current audio mode : stereo
>>> > Available subchannels: stereo
>>> >
>>> >
>>> > it appears pvrinput isn't setting the right audio mode/sub channels
>>> etc??
>>> >
>>> >
>>> > Any ideas?
>>> >
>>> > PS. It looks like analogradio plugin is no longer supported? Is
>>> also
>>> > doesn't support ALSA.
>>> >
>>> > ?
>>> >
>>> > > I've asked this before, last year, but never had a response.
>>> > >
>>> > > How do I configure radio channels in VDR.
>>> > >
>>> > > My channels.conf has:
>>> > >
>>> > > Classic Hits:90000:I999C0:C:0:0:300:305:A1:12003:1:1006:0
>>> > >
>>> > > But I think I'm picking up the wrong device, as I hear no audio. I
>>> > > have a single PVR-150 with ivtv and the following devices:
>>> > >
>>> > > /dev/video0
>>> > > /dev/video24
>>> > > /dev/video32
>>> > >
>>> > > When I do a 'ivtv-radio -f90000' I see:
>>> > > aplay -f dat < /dev/video24 #which works
>>> > >
>>> > > So....what should my Parameters be??
>>> > >
>>> > > C0 - Input 0
>>> > > C12 - Input 1
>>> > > C23 - Input 2
>>> > > C34 - Input 3
>>> > > C45 - Input 4
>>> > > C56 - Input 5
>>> > > C67 - Input 6
>>> > > C78 - Input 7
>>> > > C89 - Input 8
>>> > > C999 - Input 9
>>> > >
>>> > >
>>> > > Thanks - in advance!
>>> > >
>>> > >
>>> > >
>>> > > _______________________________________________
>>> > > vdr mailing list
>>> > > vdr@xxxxxxxxxxx
>>> > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>>> >
>>> > _______________________________________________
>>> > vdr mailing list
>>> > vdr@xxxxxxxxxxx
>>> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>>>
>>> _______________________________________________
>>> vdr mailing list
>>> vdr@xxxxxxxxxxx
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>>
>> _______________________________________________
>> vdr mailing list
>> vdr@xxxxxxxxxxx
>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>>
>
>
>
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
