I use this modified code in device.c (pvrinput):
bool cPvrDevice::Tune(int freq)
{
struct v4l2_frequency vf;
int freqaux = freq;
memset(&vf, 0, sizeof(vf));
vf.tuner = 0;
if (freq > 180000)
vf.type = V4L2_TUNER_ANALOG_TV;
else
{
vf.type = V4L2_TUNER_RADIO;
freqaux = freq * 1000;
}
vf.frequency = (int) ((double) freqaux * 16.0 / 1000.0 + 0.5);
if (IOCTL(video_fd, VIDIOC_S_FREQUENCY, &vf) != 0)
{
log(0, "Error tuning to %d: %s", freq, strerror(errno));
return false;
}
frequency = freq;
return true;
}
But I have some problems with radio(pvrinput), and xineliboutput.
Jose Alberto
El Martes, 13 de Febrero de 2007 11:01, Simon Baxter escribi?:
> It looks like this plugin does something wrong with the analog radio on
> the OEM PVR-150 card.
>
> With channels.conf set to:
> Radio 91ZM:90900:I999C0:C:0:0:300:305:A1:12003:1:1007:0
>
> v4l2-ctl --all looks like this:
>
> Audio input : 0 (Tuner 1)
> Frequency: 1454 (90.875000 MHz)
> Video standard = 0x000000ff
> PAL-B/B1/G/H/I/D/D1/K
> Tuner:
> Capabilities : 62.5 kHz multi-standard
> Frequency range : 44.0 MHz - 958.0 MHz
> Signal strength : 0%
> Current audio mode : mono
> Available subchannels:
>
>
> Where ivtv-radio -f90 looks like this:
>
> Audio input : 0 (Tuner 1)
> Frequency: 1454400 (90.900000 MHz)
> Video standard = 0x000000ff
> PAL-B/B1/G/H/I/D/D1/K
> Tuner:
> Capabilities : 62.5 Hz stereo
> Frequency range : 65.0 MHz - 108.0 MHz
> Signal strength : 50%
> Current audio mode : stereo
> Available subchannels: stereo
>
>
> it appears pvrinput isn't setting the right audio mode/sub channels etc??
>
>
> Any ideas?
>
> PS. It looks like analogradio plugin is no longer supported? Is also
> doesn't support ALSA.
>
> ?
>
> > I've asked this before, last year, but never had a response.
> >
> > How do I configure radio channels in VDR.
> >
> > My channels.conf has:
> >
> > Classic Hits:90000:I999C0:C:0:0:300:305:A1:12003:1:1006:0
> >
> > But I think I'm picking up the wrong device, as I hear no audio. I have
> > a single PVR-150 with ivtv and the following devices:
> >
> > /dev/video0
> > /dev/video24
> > /dev/video32
> >
> > When I do a 'ivtv-radio -f90000' I see:
> > aplay -f dat < /dev/video24 #which works
> >
> > So....what should my Parameters be??
> >
> > C0 - Input 0
> > C12 - Input 1
> > C23 - Input 2
> > C34 - Input 3
> > C45 - Input 4
> > C56 - Input 5
> > C67 - Input 6
> > C78 - Input 7
> > C89 - Input 8
> > C999 - Input 9
> >
> >
> > Thanks - in advance!
> >
> >
> >
> > _______________________________________________
> > vdr mailing list
> > vdr@xxxxxxxxxxx
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
