It looks like this plugin does something wrong with the analog radio on
the OEM PVR-150 card.
With channels.conf set to:
Radio 91ZM:90900:I999C0:C:0:0:300:305:A1:12003:1:1007:0
v4l2-ctl --all looks like this:
Audio input : 0 (Tuner 1)
Frequency: 1454 (90.875000 MHz)
Video standard = 0x000000ff
PAL-B/B1/G/H/I/D/D1/K
Tuner:
Capabilities : 62.5 kHz multi-standard
Frequency range : 44.0 MHz - 958.0 MHz
Signal strength : 0%
Current audio mode : mono
Available subchannels:
Where ivtv-radio -f90 looks like this:
Audio input : 0 (Tuner 1)
Frequency: 1454400 (90.900000 MHz)
Video standard = 0x000000ff
PAL-B/B1/G/H/I/D/D1/K
Tuner:
Capabilities : 62.5 Hz stereo
Frequency range : 65.0 MHz - 108.0 MHz
Signal strength : 50%
Current audio mode : stereo
Available subchannels: stereo
it appears pvrinput isn't setting the right audio mode/sub channels etc??
Any ideas?
PS. It looks like analogradio plugin is no longer supported? Is also
doesn't support ALSA.
?
> I've asked this before, last year, but never had a response.
>
> How do I configure radio channels in VDR.
>
> My channels.conf has:
>
> Classic Hits:90000:I999C0:C:0:0:300:305:A1:12003:1:1006:0
>
> But I think I'm picking up the wrong device, as I hear no audio. I have a
> single PVR-150 with ivtv and the following devices:
>
> /dev/video0
> /dev/video24
> /dev/video32
>
> When I do a 'ivtv-radio -f90000' I see:
> aplay -f dat < /dev/video24 #which works
>
> So....what should my Parameters be??
>
> C0 - Input 0
> C12 - Input 1
> C23 - Input 2
> C34 - Input 3
> C45 - Input 4
> C56 - Input 5
> C67 - Input 6
> C78 - Input 7
> C89 - Input 8
> C999 - Input 9
>
>
> Thanks - in advance!
>
>
>
> _______________________________________________
> vdr mailing list
> vdr@xxxxxxxxxxx
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
>
