Hi, On Sat, Feb 10, Reinhard Nissl wrote: > szap always sends DiSEqC commands, so I'd suggest to use VDR's > diseqc.conf. It's default section "Full DiSEqC sequence" is identical to > the tuning sequence that szap uses. > > You may want to try the attached szap and VDR patch. You'll then get > some output while tuning. doesn't my driver or card support diseqc ? --snip video:/tmp/szap # szap -a 1 -p -i reading channels from file '/root/.szap/channels.conf' >>> RTL Television,RTL;RTL World zapping to 5 'RTL Television,RTL;RTL World': sat 0, frequency = 12187 MHz H, symbolrate 27500000, vpid = 0x00a3, apid = 0x0068 sid = 0x0069 using '/dev/dvb/adapter1/frontend0' and '/dev/dvb/adapter1/demux0' FE_DISEQC_SEND_MASTER_CMD failed: Unknown error 524 FE_DISEQC_SEND_BURST failed: Operation not supported couldn't find pmt-pid for sid 0069 status 1f | signal f700 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK >>> SAT.1;ProSiebenSat.1 zapping to 6 'SAT.1;ProSiebenSat.1': sat 0, frequency = 12480 MHz V, symbolrate 27500000, vpid = 0x06ff, apid = 0x0700 sid = 0x0022 FE_DISEQC_SEND_MASTER_CMD failed: Unknown error 524 FE_DISEQC_SEND_BURST failed: Operation not supported couldn't find pmt-pid for sid 0022 status 1f | signal fb00 | snr ffdc | ber 00000000 | unc 00000000 | FE_HAS_LOCK --snip-- -- Gru? Dieter -- I do not get viruses because I do not use MS software. If you use Outlook then please do not put my email address in your address-book so that WHEN you get a virus it won't use my address in the
