Teemu Suikki wrote: > With only one card installed, both cards work fine. ... This sounds like an interesting solution... Can you post a link to picture showing this particular setup? :-P scnr > It could be some hardware issue, if there is some conflict with two > cards.. But I have tried both cards in all PCI slots, no difference there. With both cards installed, load the budget and the budget-ci modules and then take a look at the dmesg output and see what it says. Look into /proc/interrupts and see if both cards may be using the same interrupt. What happens if you append "acpi=off" and/or "noapic" to the kernel? Let us know what you found out. Andr? PS: Please start a new message when posting to a list and do not reply to an older message by replacing the subject.
