Marko M?kel? kirjoitti: > On Wed, Jan 17, 2007 at 10:16:55PM +0200, Kartsa wrote: > >>> I would suspect that you haven't set up TCP/IP networking before >>> starting vdr for the first time. >>> >>> >> I did make a working linux box with all updates before even installing vdr. >> > > Can you add the line > > (/sbin/ifconfig; /sbin/route -n) > /tmp/inet.txt > > to the script that starts vdr, right before the vdr command? That would > answer my question if TCP/IP networking is set up before vdr is started > for the first time. > I have not yet tried this but I did set up networking before installing vdr. I this for I did a network installation and updated everything before installing vdr. >> I made a test and recompiled vdr and plugins and put starting command in >> rc.local. Now it starts ok and cpu load is about 60%. But if I let FC6 >> initscript start vdr I get 99%cpu load on startup. >> > > This is another hint that the original init script might be run before > configuring TCP/IP networking. > > I actually fixed this now by not letting vdr start by the system init but added "/etc/init.d/vdr start" in rc.local. Maybe the 550 PIII is just too slow in an environment where is matrox G400 and DirectFB :) \\Kartsa
