On 1/2/06, Oliver Endriss <o.endriss@xxxxxx> wrote: > > Oliver Endriss wrote: > > Paul Lacatus wrote: > > > Sorry about offtopic but from vdr wiki I found that there is a way to > > > improve the stability of SNR and STR readings in vdr but didn't found > > > relevant information to go further with the voltage moding. If > somebody > > > can give me a link I will be gratefull > > > > See http://www.vdr-wiki.de/wiki/index.php/SpannungsMod > > I applied the first solution (loesung 1: original hauppauge): > > - remove coil connected to pin 14 of the tuner > > - connect tuner pin 14 with pin 4 (or pin 6) > > Oops, the coil is _located_ at pin 14, but _connected_ to pin 13! > So it should read: > - remove coil connected to pin 13 of the tuner > - connect tuner pin 13 with pin 4 (or pin 6) > > So for me german to english translation put some problems. I need to understand exactly what I am doing. On pin 13 is voltage from computer 5v powersupply over a small LC filter. What is on pin 4 or 6 ? Regards Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.linuxtv.org/pipermail/vdr/attachments/20060102/222a3e6f/attachment.htm
