Paul Lacatus wrote: > I am using vdr 1.3.37 on full featured thechnisat Rev 1.3 card. Drivers are > from kernel 2.6.14. I have another digital receiver connected on the loop > output of the ss1 board. After closing vdr by ctrl-c in console the ss1 > in not powering anymore the LNB leaving the other receiver to do that but > is not allowing the high frequency signal to pass trough (I presume ) since > the other receiver is indicating bad signal. If I restart the computer all > is ok until I start again vdr. I don't know if the problem is from vdr or > drivers. Load the dvb-core module with parameter 'dvb_shutdown_timeout=0'. Oliver -- -------------------------------------------------------- VDR Remote Plugin available at http://www.escape-edv.de/endriss/vdr/ --------------------------------------------------------
