Selon Jon Burgess <jburgess@xxxxxxxxxxx>: > michaelip@xxxxxxx wrote: > > Hello. > > > > Often when starting my computer, vdr crashes without any specific reason > and > > freezes the computer ! Nothing is possible/available on my comnputer ! I > just > > have to reset it ! > > What version of the em8300 driver are you using? > I think this issue might be fixed in the one of the recent releases from > http://dxr3.sourceforge.net/download.html > > A problem was fixed where the interrupt handler was installed before the > card was properly initialised and a stray interrupt from a card sharing > the interrupt line would cause an oops. > > Disabling preempt option may help as well. > > The best place to follow up on this is probably the dxr3-devel mailing > list, see http://sourceforge.net/mail/?group_id=5165 > > Jon > > _______________________________________________ > vdr mailing list > vdr@xxxxxxxxxxx > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > Hello. My em8300 driver version is the 0.15.0 at least. Maybe I have the 0.15.1 but I'm not sure, and I can't check right now ! If not, I will upgrade ! I also will remove the PREEMPT support in my kernel... Many thanks for your help.
