Am 7. Februar 2022 09:34:40 MEZ schrieb Sascha Hauer <sha@xxxxxxxxxxxxxx>: >On Mon, Feb 07, 2022 at 09:14:51AM +0100, Ahmad Fatoum wrote: >> Hello Sascha, >> >> On 07.02.22 09:00, Sascha Hauer wrote: >> > On Sun, Feb 06, 2022 at 12:19:30AM +0100, Ahmad Fatoum wrote: >> >> Most users interested in chainloading barebox will probably want >to use >> >> the generic DT format for that: It will pass the checks the boot >command >> >> may have and it will ensure the system is in the correct state, >e.g. >> >> that caches are disabled. >> >> >example: >> >> + >> >> +.. code-block:: console >> >> + >> >> + U-Boot: tftp $kernel_addr barebox-dt-2nd.img >> >> + U-Boot: tftp $fdt_addr my-board.dtb >> >> + U-Boot: booti $kernel_addr - $fdt_addr >> >> + >> This is what the documentation is saying right now. It only appeared >> in the diff, because I rephrased the start a bit. I don't have a >> 32-bit ARM U-Boot here to test, so I'd rather not rewrite that part >> myself. > >Well you've introduced the part to use the bootm command yourself :) > >commit 3a14fb79153af84323fee8308989011cd05c7d96 >Author: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> >Date: Mon Jun 17 16:18:46 2019 +0200 > >However, I obviously failed to review this properly. I'll create a >patch >for that. > >Sascha In barebox "bootm flashable.img" works, in uboot it is booti with barebox-dt-2nd.img +fdt like example. I have a armhf bananapi r2 (mt7623),but it looks not supported by barebox regards Frank _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
