On 24.06.21 15:24, Michael Tretter wrote:
> On Thu, 24 Jun 2021 12:52:58 +0200, Ahmad Fatoum wrote:
>> On 24.06.21 12:23, Michael Tretter wrote:
>>> The ZynqMP boots from an SDHCI device by reading a boot.bin file from
>>> the FAT16/32 partition, which is the first partition in the MBR.
>>>
>>> The update handler copies a boot.bin image to this partition, which
>>> might be board specific.
>>
>> Is barebox the boot.bin or is that a separate first stage bootloader?
>
> Both. The boot.bin contains at least the first stage bootloader, TF-A, and
> Barebox. You cannot boot a "standalone" Barebox image on the ZynqMP.
>
> I also documented this in the zynqmp documentation as part of this patch
> series.
I saw that after writing the mail here. Thanks for clarifying.
>
> Michael
>
>>
>>>
>>> Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> ---
>>> arch/arm/mach-zynqmp/Makefile | 1 +
>>> .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
>>> arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
>>> 3 files changed, 70 insertions(+)
>>> create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>>> create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
>>>
>>> diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
>>> index 14b8a4e46b87..e24a43c0d59f 100644
>>> --- a/arch/arm/mach-zynqmp/Makefile
>>> +++ b/arch/arm/mach-zynqmp/Makefile
>>> @@ -1,3 +1,4 @@
>>> # SPDX-License-Identifier: GPL-2.0-or-later
>>> obj-y += firmware-zynqmp.o
>>> obj-y += zynqmp.o
>>> +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
>>> diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>>> new file mode 100644
>>> index 000000000000..8502791ee0f7
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
>>> @@ -0,0 +1,21 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-only */
>>> +/*
>>> + * Copyright (C) 2020 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> + */
>>> +#ifndef __MACH_ZYNQMP_BBU_H
>>> +#define __MACH_ZYNQMP_BBU_H
>>> +
>>> +#include <bbu.h>
>>> +
>>> +#ifdef CONFIG_BAREBOX_UPDATE
>>> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
>>> + unsigned long flags);
>>> +#else
>>> +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
>>> + unsigned long flags)
>>> +{
>>> + return 0;
>>> +};
>>> +#endif
>>> +
>>> +#endif /* __MACH_ZYNQMP_BBU_H */
>>> diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
>>> new file mode 100644
>>> index 000000000000..d1197c01dc41
>>> --- /dev/null
>>> +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
>>> @@ -0,0 +1,48 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * Copyright (C) 2020 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <libfile.h>
>>> +#include <mach/zynqmp-bbu.h>
>>> +
>>> +static int zynqmp_bbu_handler(struct bbu_handler *handler,
>>> + struct bbu_data *data)
>>> +{
>>> + int ret = 0;
>>> +
>>> + ret = bbu_confirm(data);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = copy_file(data->imagefile, data->devicefile, 1);
>>> + if (ret < 0) {
>>> + pr_err("update failed: %s", strerror(-ret));
>>> + return ret;
>>> + }
EFI also registers an barebox update handler for a file: /boot/EFI/BOOT/BOOTx64.EFI,
but there apparently bbu_register_std_file_update suffices.
Did you check if that would work for you as well?
It's still a good idea to have a zynqmp specific wrapper for bbu_register_std_file_update,
but I am not sure you need to duplicate the copy_file stuff.
Also, this seems SD-specific. I assume eMMC would boot from boot partitions?
If so, zynqmp_bbu_register_sd_handler may be a more apt name.
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
>>> + unsigned long flags)
>>> +{
>>> + struct bbu_handler *handler;
>>> + int ret = 0;
>>> +
>>> + if (!name || !devicefile)
>>> + return -EINVAL;
>>> +
>>> + handler = xzalloc(sizeof(*handler));
>>> + handler->name = name;
>>> + handler->devicefile = devicefile;
>>> + handler->flags = flags;
>>> + handler->handler = zynqmp_bbu_handler;
>>> +
>>> + ret = bbu_register_handler(handler);
>>> + if (ret)
>>> + free(handler);
>>> +
>>> + return ret;
>>> +}
>>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
