On Thu, 24 Jun 2021 12:52:58 +0200, Ahmad Fatoum wrote:
> On 24.06.21 12:23, Michael Tretter wrote:
> > The ZynqMP boots from an SDHCI device by reading a boot.bin file from
> > the FAT16/32 partition, which is the first partition in the MBR.
> >
> > The update handler copies a boot.bin image to this partition, which
> > might be board specific.
>
> Is barebox the boot.bin or is that a separate first stage bootloader?
Both. The boot.bin contains at least the first stage bootloader, TF-A, and
Barebox. You cannot boot a "standalone" Barebox image on the ZynqMP.
I also documented this in the zynqmp documentation as part of this patch
series.
Michael
>
> >
> > Signed-off-by: Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
> > ---
> > arch/arm/mach-zynqmp/Makefile | 1 +
> > .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++++
> > arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 +++++++++++++++++++
> > 3 files changed, 70 insertions(+)
> > create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> > create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c
> >
> > diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
> > index 14b8a4e46b87..e24a43c0d59f 100644
> > --- a/arch/arm/mach-zynqmp/Makefile
> > +++ b/arch/arm/mach-zynqmp/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0-or-later
> > obj-y += firmware-zynqmp.o
> > obj-y += zynqmp.o
> > +obj-$(CONFIG_BAREBOX_UPDATE) += zynqmp-bbu.o
> > diff --git a/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> > new file mode 100644
> > index 000000000000..8502791ee0f7
> > --- /dev/null
> > +++ b/arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h
> > @@ -0,0 +1,21 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2020 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
> > + */
> > +#ifndef __MACH_ZYNQMP_BBU_H
> > +#define __MACH_ZYNQMP_BBU_H
> > +
> > +#include <bbu.h>
> > +
> > +#ifdef CONFIG_BAREBOX_UPDATE
> > +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> > + unsigned long flags);
> > +#else
> > +static int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> > + unsigned long flags)
> > +{
> > + return 0;
> > +};
> > +#endif
> > +
> > +#endif /* __MACH_ZYNQMP_BBU_H */
> > diff --git a/arch/arm/mach-zynqmp/zynqmp-bbu.c b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> > new file mode 100644
> > index 000000000000..d1197c01dc41
> > --- /dev/null
> > +++ b/arch/arm/mach-zynqmp/zynqmp-bbu.c
> > @@ -0,0 +1,48 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2020 Michael Tretter <m.tretter@xxxxxxxxxxxxxx>
> > + */
> > +
> > +#include <common.h>
> > +#include <libfile.h>
> > +#include <mach/zynqmp-bbu.h>
> > +
> > +static int zynqmp_bbu_handler(struct bbu_handler *handler,
> > + struct bbu_data *data)
> > +{
> > + int ret = 0;
> > +
> > + ret = bbu_confirm(data);
> > + if (ret)
> > + return ret;
> > +
> > + ret = copy_file(data->imagefile, data->devicefile, 1);
> > + if (ret < 0) {
> > + pr_err("update failed: %s", strerror(-ret));
> > + return ret;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +int zynqmp_bbu_register_handler(const char *name, char *devicefile,
> > + unsigned long flags)
> > +{
> > + struct bbu_handler *handler;
> > + int ret = 0;
> > +
> > + if (!name || !devicefile)
> > + return -EINVAL;
> > +
> > + handler = xzalloc(sizeof(*handler));
> > + handler->name = name;
> > + handler->devicefile = devicefile;
> > + handler->flags = flags;
> > + handler->handler = zynqmp_bbu_handler;
> > +
> > + ret = bbu_register_handler(handler);
> > + if (ret)
> > + free(handler);
> > +
> > + return ret;
> > +}
> >
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
