Hello, There were still a few things missing for real support for the ZynqMP ZCU104 in Barebox. This series adds support for reset source detection, Barebox environment, barebox_update and soft reset (via PSCI) for the ZynqMP ZCU104 board. It extends the zynqmp_defconfig to enable more features that you would probably want by default on a ZynqMP board. I also added some introductory information how to build and use Barebox on the ZynqMP. Michael Michael Tretter (7): ARM: zynqmp: set reset source clk: zynqmp: do not enable already enabled clocks dts: zcu104: add Barebox environment ARM: zynqmp: add update handler ARM: zynqmp: zcu104: register update handler ARM: zynqmp: defconfig: enable more features Documentation: zynqmp: add some documentation Documentation/boards/zynqmp.rst | 40 ++++++++++ arch/arm/boards/xilinx-zcu104/Makefile | 1 + arch/arm/boards/xilinx-zcu104/board.c | 18 +++++ arch/arm/configs/zynqmp_defconfig | 23 ++++++ arch/arm/dts/zynqmp-zcu104-revA.dts | 10 +++ arch/arm/mach-zynqmp/Makefile | 2 + .../arm/mach-zynqmp/include/mach/zynqmp-bbu.h | 21 ++++++ arch/arm/mach-zynqmp/include/mach/zynqmp.h | 6 ++ arch/arm/mach-zynqmp/zynqmp-bbu.c | 48 ++++++++++++ arch/arm/mach-zynqmp/zynqmp.c | 74 +++++++++++++++++++ drivers/clk/zynqmp/clk-gate-zynqmp.c | 3 + 11 files changed, 246 insertions(+) create mode 100644 Documentation/boards/zynqmp.rst create mode 100644 arch/arm/boards/xilinx-zcu104/board.c create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp-bbu.h create mode 100644 arch/arm/mach-zynqmp/include/mach/zynqmp.h create mode 100644 arch/arm/mach-zynqmp/zynqmp-bbu.c create mode 100644 arch/arm/mach-zynqmp/zynqmp.c -- 2.29.2 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
