On Wed, 2018-07-18 at 15:53 +0200, Bastian Stender wrote: > Hi, > > On 07/18/2018 03:01 PM, Oleksij Rempel wrote: > > you email is in the list. (well, different version of it are already > > in the list). Please wait if some one can respond here. > > > > I'm not an expert, but probably what you need is > > https://github.com/rauc > > Have a look here: > > http://rauc.readthedocs.io/en/latest/advanced.html#updating-the-bootloader > > Updating barebox on NAND is not yet implemented. It would certainly be a > nice feature to have. Have a look in section 7.6.2 if you want to do that. Speaking with my rauc maintainer hat on... Writing barebox to NAND on an i.MX6 can't be done by generic methods, so for rauc we would want to call something like barebox-update which then handles the details. In any case, rauc is not intended for initial installation in the factory, but for updating in the field. Instead of MFGtools, we usually load barebox via imx-usb-loader. That is configured to start the fastboot gadget, which we then use to write barebox (via barebox_update) and the rootfs. Regards, Jan -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
