It is the normal default DTS from barebox/linux. I output a 'of_dump': https://hastebin.com/zanogazonu.xml greets Pascal 2018-05-22 20:24 GMT+02:00 Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>: > Am 22.05.2018 um 19:38 schrieb Pascal Vizeli: >> With debug modus it works perfect :) Look like the Serial console is >> not exists (PL011). >> Is that a problem with changed/updated DTS files? >> >> =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.05.22 19:33:41 =~=~=~=~=~=~=~=~=~=~=~= >> uart-pl011 3f201000.serial: probe failed: No such file or directory > > this uart driver would exit in two cases: > 1. regulator is present, but can't enable it > 2. no clock is provided. > > I assume we have here a second case. > Is it not define in devicetree? > > >> bcm2835-gpio 3f200000.gpio: probed gpiochip-1 with base 0 >> malloc space: 0x1f9fcdc0 -> 0x1fdfcdbf (size 4 MiB) >> no /dev/disk0.0. using default env >> environment load /dev/env0: No such file or directory >> Maybe you have to create the partition. >> running /env/bin/init... >> - Hit m for menu or wait for autoboot - >> bootchooser: Cannot get state 'state' >> Nothing bootable found on 'bootchooser' >> Nothing bootable found >> HassOS boot Menu: 1: Autoboot 2: Boot System 0 3: Boot >> System 1 4: Shell >> >> 2018-05-22 10:16 GMT+02:00 Roland Hieber <r.hieber@xxxxxxxxxxxxxx>: >>> On Mon, May 21, 2018 at 05:51:33PM +0200, Pascal Vizeli wrote: >>>> Hi, >>>> >>>> I try to build a bootable barebox for raspberry with 2018.05.00 and buildroot: >>>> https://github.com/home-assistant/hassos/tree/dev/buildroot-external >>>> >>>> I build the origin rpi_defconfig but I'm was not able to boot the >>>> 'barebox.bin' and become a output on UART. I can boot the linux kernel >>>> from rpi loader. If I try the barebox, it will be flash the green >>>> light and if I disable the LED support, only the red power light is >>>> seen. >>>> >>>> I try also the RPi3 patches and end in same result. >>>> I follow also this guide: >>>> https://www.barebox.org/doc/latest/boards/bcm2835.html >>>> >>>> Have anyone a idea what will be the problem or what I doing wrong? >>> >>> Which version of the RPi firmware are you using? I wrote that section >>> while using the git tag 1.20171029, maybe they changed something >>> again... >>> >>> What you can try to do is enable "low level debug messages" make >>> menuconfig under "Debugging", and try to set the log level to something >>> higher and see if you get any output. I think you also need to set >>> "System Type" -> "Lowlevel debug UART" to the model you're using. >>> >>> - Roland >>> >>> -- >>> Roland Hieber | r.hieber@xxxxxxxxxxxxxx | >>> Pengutronix e.K. | https://www.pengutronix.de/ | >>> Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | >>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >> >> _______________________________________________ >> barebox mailing list >> barebox@xxxxxxxxxxxxxxxxxxx >> http://lists.infradead.org/mailman/listinfo/barebox >> > > > -- > Regards, > Oleksij > _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox