Am 22.05.2018 um 19:38 schrieb Pascal Vizeli: > With debug modus it works perfect :) Look like the Serial console is > not exists (PL011). > Is that a problem with changed/updated DTS files? > > =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.05.22 19:33:41 =~=~=~=~=~=~=~=~=~=~=~= > uart-pl011 3f201000.serial: probe failed: No such file or directory this uart driver would exit in two cases: 1. regulator is present, but can't enable it 2. no clock is provided. I assume we have here a second case. Is it not define in devicetree? > bcm2835-gpio 3f200000.gpio: probed gpiochip-1 with base 0 > malloc space: 0x1f9fcdc0 -> 0x1fdfcdbf (size 4 MiB) > no /dev/disk0.0. using default env > environment load /dev/env0: No such file or directory > Maybe you have to create the partition. > running /env/bin/init... > - Hit m for menu or wait for autoboot - > bootchooser: Cannot get state 'state' > Nothing bootable found on 'bootchooser' > Nothing bootable found > HassOS boot Menu: 1: Autoboot 2: Boot System 0 3: Boot > System 1 4: Shell > > 2018-05-22 10:16 GMT+02:00 Roland Hieber <r.hieber@xxxxxxxxxxxxxx>: >> On Mon, May 21, 2018 at 05:51:33PM +0200, Pascal Vizeli wrote: >>> Hi, >>> >>> I try to build a bootable barebox for raspberry with 2018.05.00 and buildroot: >>> https://github.com/home-assistant/hassos/tree/dev/buildroot-external >>> >>> I build the origin rpi_defconfig but I'm was not able to boot the >>> 'barebox.bin' and become a output on UART. I can boot the linux kernel >>> from rpi loader. If I try the barebox, it will be flash the green >>> light and if I disable the LED support, only the red power light is >>> seen. >>> >>> I try also the RPi3 patches and end in same result. >>> I follow also this guide: >>> https://www.barebox.org/doc/latest/boards/bcm2835.html >>> >>> Have anyone a idea what will be the problem or what I doing wrong? >> >> Which version of the RPi firmware are you using? I wrote that section >> while using the git tag 1.20171029, maybe they changed something >> again... >> >> What you can try to do is enable "low level debug messages" make >> menuconfig under "Debugging", and try to set the log level to something >> higher and see if you get any output. I think you also need to set >> "System Type" -> "Lowlevel debug UART" to the model you're using. >> >> - Roland >> >> -- >> Roland Hieber | r.hieber@xxxxxxxxxxxxxx | >> Pengutronix e.K. | https://www.pengutronix.de/ | >> Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Regards, Oleksij
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
