Hi everyone, I recently had a chance to work with at91sam9x5ek board and as a part of that effort I converted the code to support features found in Barebox for i.MX based SoCs. Most notably this patchset converts at91sam9x5ek to use multi-image PBL build process as well as adds support for board initialization from attached devicetree blob. Sascha, at least for now, all of the patches, in chronological order, are included in this submission. However if this proves to be too burdensome to review, I'd be more than happy to split it into several individual submissions. One such division could be: - Generic bug fixes/infrastructure enhancements - Peripheral drivers updates - at91sam9x5ek specific changes Please let me know if that is preferrable. Thank you, Andrey Smirnov Andrey Smirnov (45): at91: Fix bug/typo in debug_ll.h at91sam9x5ek: Convert to mult-image build at91sam9x5ek: Add CONFIG_KALLSYMS to defconfig at91sam9x5ek: Add preliminary device tree support clocksource: at91: Move to 'drivers/clocksource' clocksource: at91: Add DT compatibility table serial: atmel: Check result of clk_get() serial: atmel: Add DT compatibility table regmap: Implement syscon_node_to_regmap() clk: Port two helper functions from Linux clk: Make COMMON_CLK_OF_PROVIDER depend on OFTREE clk: No-op CLK_OF_DECLARE if not enabled clk: at91: Port at91 DT clock code at91sam9x5ek: Convert to use DT clock tree at91sam9x5ek: Remove at91sam9x5ek_mem_init() at91sam9x5ek: Configure LEDs in DT pinctrl-at91: Fix a bug in at91_pinctrl_set_conf() at91: Enable PINCTRL for SOC_AT91SAM9 at91sam9x5ek: Configure I2C via DT mci: Allow parsing for explicit DT node mci: atmel_mci: Add DT support at91sam9x5ek: Configure MMC in DT of: base: Use scoring in DT device matching pinctrl: at91: Fix a bug in at91_pinctrl_set_state pinctrl: at91: Implement .get_direction hook spi: atmel_spi: Add DT support spi: atmel_spi: Configure CS GPIO as output spi: atmel_spi: Use VERSION register instead of CPU type at91sam9x5ek: Configure SPI in DT w1-gpio: Add DT support at91sam9x5ek: Configure 1-wire in DT usb: ohci-at91: Check result of clk_get() usb: ohci-at91: Convert global variables to private data usb: ohci-at91: Check result of clk_enable() usb: ohci-at91: Add DT support usb/host: Allow USB_OHCI_AT91 even if USB_OHCI is disabled usb: ehci-atmel: Check result of clk_enable() usb: echi-atmel: Convert global variables to private data usb: ehci-atmel: Zero ehci_data before using it usb: echi-atmel: Check result of ehci_register() usb: echi-atmel: Add DT support at91sam9x5ek: Configure USB in DT net: macb: Add DT support at91sam9x5ek: Configure Ethernet in DT at91sam9x5ek: Configure NAND in DT arch/arm/Kconfig | 2 +- arch/arm/boards/at91sam9x5ek/Makefile | 1 + arch/arm/boards/at91sam9x5ek/hw_version.c | 6 +- arch/arm/boards/at91sam9x5ek/hw_version.h | 1 - arch/arm/boards/at91sam9x5ek/init.c | 226 ++------ arch/arm/boards/at91sam9x5ek/lowlevel.c | 21 + arch/arm/configs/at91sam9x5ek_defconfig | 8 +- arch/arm/dts/Makefile | 2 + arch/arm/dts/at91sam9x5ek.dts | 72 +++ arch/arm/mach-at91/Kconfig | 73 ++- arch/arm/mach-at91/Makefile | 10 +- arch/arm/mach-at91/at91sam9x5.c | 311 ----------- arch/arm/mach-at91/include/mach/board.h | 6 +- arch/arm/mach-at91/include/mach/debug_ll.h | 2 +- arch/arm/mach-at91/setup.c | 4 +- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/at91/Makefile | 15 + drivers/clk/at91/clk-generated.c | 323 ++++++++++++ drivers/clk/at91/clk-h32mx.c | 125 +++++ drivers/clk/at91/clk-main.c | 576 +++++++++++++++++++++ drivers/clk/at91/clk-master.c | 245 +++++++++ drivers/clk/at91/clk-peripheral.c | 430 +++++++++++++++ drivers/clk/at91/clk-pll.c | 516 ++++++++++++++++++ drivers/clk/at91/clk-plldiv.c | 135 +++++ drivers/clk/at91/clk-programmable.c | 254 +++++++++ drivers/clk/at91/clk-slow.c | 108 ++++ drivers/clk/at91/clk-smd.c | 172 ++++++ drivers/clk/at91/clk-system.c | 160 ++++++ drivers/clk/at91/clk-usb.c | 397 ++++++++++++++ drivers/clk/at91/clk-utmi.c | 138 +++++ drivers/clk/at91/pmc.c | 41 ++ drivers/clk/at91/pmc.h | 27 + drivers/clk/at91/sckc.c | 485 +++++++++++++++++ drivers/clk/clk-fixed-factor.c | 2 - drivers/clk/clk-fixed.c | 3 +- drivers/clk/clk.c | 41 +- drivers/clk/clkdev.c | 2 +- drivers/clocksource/Kconfig | 4 + drivers/clocksource/Makefile | 1 + .../clocksource/timer-atmel-pit.c | 9 + drivers/mci/atmel_mci.c | 101 ++-- drivers/mci/mci-core.c | 13 +- drivers/mfd/syscon.c | 54 +- drivers/net/macb.c | 56 +- drivers/of/base.c | 37 +- drivers/pinctrl/pinctrl-at91.c | 22 +- drivers/serial/atmel.c | 12 + drivers/spi/atmel_spi.c | 70 ++- drivers/spi/atmel_spi.h | 1 + drivers/usb/host/Kconfig | 5 +- drivers/usb/host/ehci-atmel.c | 66 ++- drivers/usb/host/ohci-at91.c | 156 +++++- drivers/w1/masters/w1-gpio.c | 53 ++ images/Makefile | 1 + images/Makefile.at91 | 7 + include/linux/clk.h | 9 +- include/linux/clk/at91_pmc.h | 188 +++++++ include/mci.h | 1 + include/mfd/syscon.h | 8 + 60 files changed, 5150 insertions(+), 666 deletions(-) create mode 100644 arch/arm/boards/at91sam9x5ek/lowlevel.c create mode 100644 arch/arm/dts/at91sam9x5ek.dts delete mode 100644 arch/arm/mach-at91/at91sam9x5.c create mode 100644 drivers/clk/at91/Makefile create mode 100644 drivers/clk/at91/clk-generated.c create mode 100644 drivers/clk/at91/clk-h32mx.c create mode 100644 drivers/clk/at91/clk-main.c create mode 100644 drivers/clk/at91/clk-master.c create mode 100644 drivers/clk/at91/clk-peripheral.c create mode 100644 drivers/clk/at91/clk-pll.c create mode 100644 drivers/clk/at91/clk-plldiv.c create mode 100644 drivers/clk/at91/clk-programmable.c create mode 100644 drivers/clk/at91/clk-slow.c create mode 100644 drivers/clk/at91/clk-smd.c create mode 100644 drivers/clk/at91/clk-system.c create mode 100644 drivers/clk/at91/clk-usb.c create mode 100644 drivers/clk/at91/clk-utmi.c create mode 100644 drivers/clk/at91/pmc.c create mode 100644 drivers/clk/at91/pmc.h create mode 100644 drivers/clk/at91/sckc.c rename arch/arm/mach-at91/at91sam926x_time.c => drivers/clocksource/timer-atmel-pit.c (93%) create mode 100644 images/Makefile.at91 create mode 100644 include/linux/clk/at91_pmc.h -- 2.9.3 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
