[PATCH 22/45] at91sam9x5ek: Configure MMC in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
 arch/arm/boards/at91sam9x5ek/init.c | 20 --------------------
 arch/arm/dts/at91sam9x5ek.dts       |  5 +++++
 2 files changed, 5 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boards/at91sam9x5ek/init.c b/arch/arm/boards/at91sam9x5ek/init.c
index fca5e7d..8acb23c 100644
--- a/arch/arm/boards/at91sam9x5ek/init.c
+++ b/arch/arm/boards/at91sam9x5ek/init.c
@@ -168,25 +168,6 @@ static void ek_add_device_lcdc(void)
 static void ek_add_device_lcdc(void) {}
 #endif
 
-/*
- * MCI (SD/MMC)
- */
-/* mci0 detect_pin is revision dependent */
-static struct atmel_mci_platform_data mci0_data = {
-	.bus_width	= 4,
-	.detect_pin	= AT91_PIN_PD15,
-	.wp_pin		= -EINVAL,
-};
-
-static void ek_add_device_mci(void)
-{
-	if (at91sam9x5ek_cm_is_vendor(VENDOR_COGENT))
-		mci0_data.detect_pin = -EINVAL;
-
-	/* MMC0 */
-	at91_add_device_mci(0, &mci0_data);
-}
-
 static const struct spi_board_info ek_cm_cogent_spi_devices[] = {
 	{
 		.name		= "mtd_dataflash",
@@ -255,7 +236,6 @@ static int at91sam9x5ek_devices_init(void)
 	ek_add_device_nand();
 	ek_add_device_eth();
 	ek_add_device_spi();
-	ek_add_device_mci();
 	ek_add_device_usb();
 	ek_add_device_lcdc();
 
diff --git a/arch/arm/dts/at91sam9x5ek.dts b/arch/arm/dts/at91sam9x5ek.dts
index f9ae091..00bb86a 100644
--- a/arch/arm/dts/at91sam9x5ek.dts
+++ b/arch/arm/dts/at91sam9x5ek.dts
@@ -9,6 +9,11 @@
 #include <arm/at91sam9x5ek.dtsi>
 
 / {
+	aliases {
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+	};
+
 	i2c-gpio-0 {
 		status = "okay";
 	};
-- 
2.9.3


_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox



[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux