Hi,
a new round of barebox patches for the i.MX6 Phytec boards. New variants, two
fixes for phyBOARD-SUBRA/ALCOR and phyFLEX-i.MX6 and industrial/automotive RAM
calibration values for phyCORE-i.MX6 Solo/DualLite.
These patches are based on the next branch and the current changes in patches
ARM: i.MX: increase barebox partition sizes
ARM: dts: Fix partition names
are already integrated.
Kind reagards,
Stefan Christ
Christian Hemp (1):
ARM: phytec-som-imx6: add phyCORE-i.MX6 Quad 2GiB RAM
Jan Remmet (1):
imx6qdl-phytec-pfla02.dtsi: add i2c eeprom
Stefan Christ (13):
ARM: imx_v7_defconfig: enable NANDTEST command
ARM: imx_v7_defconfig: add command mmc_extcsd
ARM: imx6q: add support for phyBOARD-SUBRA-i.MX6 Quad
ARM: dts: imx6: phyboards: reduce clock speed for usdhc3
ARM: dts: pfla02: use long enough reset for ethernet phy
ARM: phytec-som-imx6: add barebox partitions for MMC
ARM: phytec-som-imx6: add boot device emmc and automount
ARM: phytec-som-imx6: fix bootsource for phyCORE-i.MX6
ARM: phytec-som-imx6: add phyCORE-i.MX6 DualLite
ARM: phytec-som-imx6: update RAM calibration for phycore-imx6dl
ARM: phytec-som-imx6: rename environment folder
ARM: phytec-som-imx6: adapt main update handler for eMMC
ARM: phytec-som-imx6: add NOR for phycore-imx6 emmc
arch/arm/boards/phytec-som-imx6/Makefile | 2 +-
arch/arm/boards/phytec-som-imx6/board.c | 17 +++--
.../defaultenv-physom-imx6-mira/init/automount | 14 -----
.../defaultenv-physom-imx6-phycore/boot/emmc | 5 ++
.../defaultenv-physom-imx6-phycore/init/automount | 17 +++++
.../defaultenv-physom-imx6-phycore/init/bootsource | 19 ++++++
.../flash-header-phytec-pcm058-2gib.imxcfg | 8 +++
.../flash-header-phytec-pcm058dl-1gib.imxcfg | 8 +++
.../phytec-som-imx6/flash-header-phytec-pcm058dl.h | 24 ++++----
arch/arm/boards/phytec-som-imx6/lowlevel.c | 3 +
arch/arm/configs/imx_v7_defconfig | 2 +
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/imx6dl-phytec-phyboard-subra.dts | 17 +----
arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts | 72 ++++++++++++++++++++++
arch/arm/dts/imx6q-phytec-phyboard-alcor.dts | 1 +
arch/arm/dts/imx6q-phytec-phyboard-subra.dts | 20 ++++++
arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts | 21 +++++++
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 13 ++++
arch/arm/dts/imx6qdl-phytec-phyboard-subra.dtsi | 30 +++++++++
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 1 +
images/Makefile.imx | 15 +++++
21 files changed, 265 insertions(+), 48 deletions(-)
delete mode 100644 arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-mira/init/automount
create mode 100644 arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/boot/emmc
create mode 100644 arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/automount
create mode 100644 arch/arm/boards/phytec-som-imx6/defaultenv-physom-imx6-phycore/init/bootsource
create mode 100644 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058-2gib.imxcfg
create mode 100644 arch/arm/boards/phytec-som-imx6/flash-header-phytec-pcm058dl-1gib.imxcfg
create mode 100644 arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
create mode 100644 arch/arm/dts/imx6q-phytec-phyboard-subra.dts
create mode 100644 arch/arm/dts/imx6qdl-phytec-phyboard-subra.dtsi
--
1.9.1
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
