Hello Rolf,
after I apply the Patch from Teresa I got the ">".
Yes the last barebox worked. Yesterday I configured the new barebox in
the same way as the old one and got the ">" the size of my image is only
93260 bytes so it should work but it do not work. So I will spend no
more time with the phyWega and wait for the phyCore Kit and start there
my next try.
Thanks for your helping
Florian
Am 09.07.2014 08:47, schrieb Rolf Evers-Fischer:
Hello Florian,
On Tue, 8 Jul 2014, Teresa Gamez wrote:
Hello Florian,
I guess you having the default kit WEGA, which does have 256MB RAM. The mainline supported
phyCORE Kit does have 512MB. Thats probably why it does not start up.
I'll have a look at it.
Teresa
I'm not 100% sure, but I can imagine that the ">" should also appear when
the SDRAM configuration is not correct. But nevertheless the correct
SDRAM setting is important. Maybe, you can check the SDRAM setting of your
previous barebox-2013.11. I assume, the old barebox was running properly,
wasn't it?
Sorry but I have no idea which information I can send you to help me
with my problem...
Florian, could you please check the size of your 1st stage bootloader
(MLO) binary?
It must not exceed 111616 byte! Otherwise it will not boot.
You can shrink the size by removing all unnecessary stuff from the
barebox_mlo configuration.
Best regards,
Rolf
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
