Hi Florian, On Fri, Jul 04, 2014 at 12:12, Florian Wrede wrote: > I like to update from barebox 2013.11 to barebox 2014.06.0 with the > phyBoard-Wega-AM335x. After reconfigure the barebox I get the error: > > LD images/start_am33xx_phytec_phycore_sram.pbl > arch/arm/boards/built-in-pbl.o: In function `pcm051_board_init': > :(.text.pcm051_board_init+0x94): undefined reference to > `__dtb_am335x_phytec_phycore_start' > make[2]: *** [images/start_am33xx_phytec_phycore_sram.pbl] Error 1 > make[1]: *** [images] Error 2 I've had the same problem after updating my beaglebone project to a newer barebox version. Could you please check your barebox configuration? The new config item "Allow multiple boards to be selected" in "System Type"->"OMAP Features" needs to be selected. After that you should be able to select the "Phytec phyCORE pcm051" board. A rebuild will create a file called "am335x-phytec-phycore-dtb.S" in the folder arch/arm/dts. This file contains the missing symbols. Best regards, Rolf _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
