On Wed, Jun 25, 2014 at 06:22:04PM +0200, Holger Schurig wrote: > On my i.MX6 I have CONFIG_CONSOLE_FULL and CONSOLE_ACTIVATE_NONE > defined. But still my serial is automatically activated as a console. > > barebox:/ devinfo cs0 > Bus: platform > Parameters: > baudrate: 115200 > active: ioe > > I'd rather active the serial port as a console only if a key is > pressed during power on. Based on the help text of > CONFIG_ACTIVATE_NONE, I actually thought that this would happen. > > Any hints? > > > I could remove chosen/stdout-path from my DTS and put it in > on-the-fly? This sounds a bit ugly ... Indeed you have to remove the stdout-path property from DTS. You don't have to add it back, 'cs0.active=ioe' should do it. Note we currently don't have persistent names for the console devices which means that cs0 is whatever is probed first. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
