On 06/22/2014 10:34 PM, Alexander Aring wrote: > This patch add a basic support for the D-Link DNS-325. > > Currently only booting via uart with kwboot is supported. The barebox > kwboot utility doesn't work at the moment. Use kwboot utility from u-boot > instead. Why does kwboot does not work? There is an issue with early Kirkwood's BootROM and UART boot mode. Just try over and over again. I also recall modifying the timeouts may help. > Signed-off-by: Alexander Aring <alex.aring@xxxxxxxxx> > --- [...] > diff --git a/arch/arm/boards/dlink-dns325/dlink-dns325.dox b/arch/arm/boards/dlink-dns325/dlink-dns325.dox > new file mode 100644 > index 0000000..414b2e7 > --- /dev/null > +++ b/arch/arm/boards/dlink-dns325/dlink-dns325.dox > @@ -0,0 +1,37 @@ > +/** @page dlink-dns325 D-Link DNS-325 NAS > + > +The NAS has > +@li Kirkwood 88F6281-A1 SoC > +@li 256 MB SDRAM > +@li 128 MB NAND type SAMSUNG 946 K9F1G08U0B PCB0 > +@li 2 SATA interfaces > +@li RS232 serial interface > +@li 1 USB interface > +@li 1 Gigabit Ethernet interface > +@li 1 Temp Sensor G751-2f > +@li 1 MCU Holtek HT48C06E for Power Managment > +@li LEDs & buttons > + > +The NAS doesn't support NAND right now. > +Only boot via uart with kwboot is supported. Is it the NAS that doesn't support NAND or is it missing driver support for barebox instead? > +The kwboot utility of barebox doesn't work right now. > +Instead use the u-boot kwboot utility: See above, we should fix kwboot instead. Sebastian _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
