Hello, On Mon, Mar 31, 2014 at 05:09:20PM +0200, Sascha Hauer wrote: > Due to updates the panda_*defconfig configs currently do not build for > the panda board. Please either manually call a make menuconfig and set > the config back to panda: > > System Type ---> > OMAP Features ---> > Select OMAP board (Texas Instrument's Panda Board) ---> > > Or apply the patch I just sent to the list: Thanks for the heads up. I shall try it and see if it works. > ARM: Panda: Fix board selection in panda defconfig files > > I'm not 100% sure the ES variant is supported. What was the difference > between the ES and the regular board again? Does the ES have a omap4460 > whereas the regular board has a omap4430? If yes then the ES should be > supported. Yes, this is indeed the case. Thank you for the reply and the patch. -- Nur Hussein http://unixcat.org _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
