Hi, On Mon, Mar 31, 2014 at 09:04:18PM +0800, Nur Hussein wrote: > Dear all, > > I am using barebox-2014.03.0 to try to boot on a Pandaboard ES. I have followed the instructions in the docs: > > http://wiki.barebox.org/doku.php?id=boards:omap > > I could not however find a barebox.bin.ift file in the output, so I guessed and went with the barebox-flash-image linked file and named it MLO. Yes, right. barebox-flash-image is the correct file to use. I updated this in the wiki. > > It did not work. The Pandaboard ES did not boot. Due to updates the panda_*defconfig configs currently do not build for the panda board. Please either manually call a make menuconfig and set the config back to panda: System Type ---> OMAP Features ---> Select OMAP board (Texas Instrument's Panda Board) ---> Or apply the patch I just sent to the list: ARM: Panda: Fix board selection in panda defconfig files I'm not 100% sure the ES variant is supported. What was the difference between the ES and the regular board again? Does the ES have a omap4460 whereas the regular board has a omap4430? If yes then the ES should be supported. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
