Hello Sascha, I have tested the patch on three phyCARD-i.MX6 and three phyFLEX-i.MX6 modules without problems. Christian Am Montag, den 31.03.2014, 10:42 +0200 schrieb Sascha Hauer: > On Thu, Mar 13, 2014 at 07:54:58AM +0100, Sascha Hauer wrote: > > Hi Dmitry, > > > > On Wed, Mar 12, 2014 at 10:54:11AM +0300, Dmitry Lavnikevich wrote: > > > This patch implements updating barebox on i.MX6 NAND. In userspace > > > similar task is performed by freescale kobs-ng utility. > > > To use this bbu profile nand handler should be registered in board > > > code with 'imx6_bbu_internal_nand_register_handler' function. > > > > I have the very same patch in the queue, it seems we have duplicated > > some work. As this version has some shortcomings I'll post my version as > > an alternative implementation. Also I'll try your version on a board I > > have here on which my version doesn't work (which is the reason I > > haven't posted my patch yet) > > The NAND boot on our board finally works. It turned out to be a silly > bug in the DCD table. The DCD table turned off the GPMI clocks which > of course prevented the ROM from loading the rest of the image. > > I just resent my version of this patch, but included the missing check > for a valid image and the confirmation question from your version. > > Maybe you could give this a test on your board. > > Sascha > _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
