On Thu, Mar 13, 2014 at 08:42:52PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 08:38 Thu 13 Mar , Sascha Hauer wrote: > > Hi Sean, > > > > On Thu, Mar 13, 2014 at 10:04:35AM +0800, Sean Cross wrote: > > > Hi, > > > > > > I've finally managed to get U-Boot's SPL to configure DDR3 and load > > > barebox off of a FAT partition on an i.MX6DL. I also have a barebox > > > build with most features turned on, and I'm running into a number of > > > problems. barebox is able to load a zImage off of the FAT partition, > > > set up ATAGs, and jump to it. So I have the basics done. But there are > > > lots of little things that aren't working. > > > > > > When I boot without an Ethernet cable plugged in, the "timeout" command > > > takes a very long time to complete. It generally freezes at "Hit any > > > key to stop autoboot: 3" and tends to ignore input for around ten > > > seconds. How can I prevent this from happening, short of compiling out > > > FEC support? > > > > Are you trying to start from network without a cable plugged in? When I > > start from network without a cable I get: > > > > running /env/bin/init... > > > > Hit m for menu or any other key to stop autoboot: 1 > > blspec: blspec_scan_directory: net loader/entries > > booting net > > dhcp failed: Network is down > > dhcp: Network is down > > > > I get the same issue on Calao USB keys > > this is quite anoying > > can we fix it Well if we try booting from network then we have to wait until it's clear that there's no link. It may be that I don't understand the actual problem or issue. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
