On Tue, Dec 10, 2013 at 07:30:29PM +0400, Antony Pavlov wrote: > On Tue, 10 Dec 2013 14:31:23 +0100 > Atilla Filiz <atilla.filiz@xxxxxxxxx> wrote: > > > Ok, then my problem is slightly more clear, that /dev/phy0 does not exist. > > I do define a struct fec_platform_data with > > xcv_type=PHY_INTERFACE_MODE_MII and register it via imx27_add_fec(). > > > > Now I need to find out why it fails to register the device. > > There is an issue with current barebox. > > The /dev/phy0 device not present just after boot. You need somehow to use network > to make it appeared. > > Use this [ugly!] method: > Run barebox on your board. Just after boot /dev/phy0 is absent. > So run 'dhcp' command. In a few seconds press "ctrl-c" to interrupt it. > Check /dev/phy0 presence. This is really annoying and something which I'd like to have fixed for longer. I'm currently working my way through the phy layer to fix that. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
