This patchset adds support for Voipac Baseboard using x53-dmm-668 module (equipped with i.mx53 CPU). More info about the module may be found at: http://www.voipac.com/#X53-DMM-668 Changes since v1: * Fixed error checking in fec_imx.c * Board support is now done in the 'multiboard way' Rostislav Lisovy (3): ARM: dts: i.mx53: Internal keyboard controller + i2c pinmux ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree ARM: i.mx53: Support for Voipac board with X53-DMM-668 module. arch/arm/boards/Makefile | 1 + arch/arm/boards/freescale-mx53-vmx53/Makefile | 3 + arch/arm/boards/freescale-mx53-vmx53/board.c | 42 +++++ .../boards/freescale-mx53-vmx53/env/config-board | 8 + .../flash-header-imx53-vmx53.imxcfg | 54 ++++++ arch/arm/boards/freescale-mx53-vmx53/lowlevel.c | 19 ++ arch/arm/dts/Makefile | 4 +- arch/arm/dts/imx53-voipac-bsb.dts | 135 ++++++++++++++ arch/arm/dts/imx53-voipac-dmm-668.dtsi | 196 ++++++++++++++++++++ arch/arm/dts/imx53.dtsi | 15 ++ arch/arm/mach-imx/Kconfig | 8 + drivers/net/fec_imx.c | 33 ++++ images/Makefile.imx | 5 + 13 files changed, 522 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config-board create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash-header-imx53-vmx53.imxcfg create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c create mode 100644 arch/arm/dts/imx53-voipac-bsb.dts create mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
